Search results

Another round of ttwtd, another month of me trying to work up the hobby energy to finish either my blood knights or my blood bowl vampires (currently ranked second in the local league), either of which would make a solid entry here. If I again fall short, then I also have a new D&D character...

Printed one of the stairs sections. Only slightly modified from the original file to add a bone wall design to the outer face from another wall segment, since 3dhexes left the stairs wall face blank. I like the look of the stairs, but there are some issues with them from a game play...

Oh, yeah, absolutely, hexwraiths are still amazing, and nighthaunt in general are still wildly op. since the initial round of results their event win rate has come down a little, dropping from like 70% down to like 65%, but it's still way too high and we should absolutely still be braced for a...

Welcome! I hope you enjoy Old World. I've been having fun w it so far. Vamp counts are pretty darn strong right now, so the fact that their rules are, for the moment at least, locked in as a legacy army isn't really a bad thing, and the AoS soulblight Gravelords range works peetty well for...

I decided the bone design on the corner tower isn't ~so~ messed up that I can't fix it with a bit of filing, dremel, and putty work, so I went ahead and printed another anyway. This lot's all magnetized & snaps together nicely. It's really coming together now, in the broad strokes at least it's...

there's a battletome preview article up on warcom. https://www.warhammer-community.com/2024/08/30/warhammer-age-of-sigmar-new-battletomes-for-a-new-edition/ I expected as much already, but at least coming out of the gate in 4e the battletome rules are going to look very much like the index...

Test print of a corner tower. Went with the shorter tower, & its already pretty huge. a lot of printing trouble on the central bone design. Not sure it it's acceptibly fixable or if i need to change approaches somehow - maybe printing the wall faces separately so they can print facing up, &...

printed the ruined wall segments. ran out of filament halfway thru, & store out of plain grey, so they're part olive. Shouldn't make a difference once they're painted. also magnetized these pieces, including drilling out holes for magnets on the gate, which didn't have them by default...

There needs to be a flat surface to print without supports. I could do two pieces & glue them together front-to-back I suppose, but the rear view didn't feel like it was worth the bother right now, especially since the portcullis as is was kind of crudely & quickly cobbled together. I kind of...

Skull Gate printed. The slot for the portcullis works well. It did cause some misprinting on the underside, and the bridging at the very top was a bit much for my printer & filament to handle, but it's nothing I can't clean up, and since the rough bits are on the underside it's not typically...

Thanks! The gate printed pretty well, some minor issues, I'll try to get pics together this afternoon. In the mean time, I took a short break from bone fort printing for a request from the roommate: some terrain to use in space combat games like Battlefleet Gothic or A Billion Suns. Had to...

While I'm deciding on which version of the corner towers to run with, I've started customization on the gate. I really love this piece as 3DHexes made it, so I don't want to change much about it, but I did want there to be some sort of actual gate to the gate. By default it feels a bit lacking...

I don't even really consider it a nerf. Like, it was a change that made them worse, so technically sure, but to me 'nerf' implies a change made for balance reasons, like the previous version was as intended, but proved to be too strong so the devs opted to change it. In contrast, when...

Ok, so I'm mostly happy with the revised corner towers, again assuming they print. The only question left before a test print is how tall they should be. The above mock ups show slightly shorter corner towers on the left, and slightly taller on the right. On the one hand, taller towers are I...

Updated Faction Packs are available on warcom. Frustratingly, there is no pdf with just a list of the errata, though for whatever reason they did list the changes separately in an update to the AoS app. So long as the app is accurate, the changes for undead are: Nighthaunt: Hexwraith control...

Mock-ups of the fortress in various configurations using the revised corner tower, along with the artwork that I was trying to draw from for inspiration. Fairly happy with how it's looking at the moment, but the tower file is still enough of a mess that I'm not sure it will actually print. In...

I had to start the tower project over. As per me not knowing what I'm doing, apparently hacking stl files to pieces and then mushing them all together results in super fucked up files that still mostly print ok but that get increasingly more difficult for the slicer to process. Trying to...

https://www.printablescenery.com/product/necromancer-tower-add-on/ https://cults3d.com/en/3d-model/art/alien-nest-wall-xenomorph https://cults3d.com/en/3d-model/game/alien-lair-hive-infestation Some additional stl viles that might be relevant for ossiarch terrain - a 'necromancer's tower'...

I've tried to start specific logs here for various armies, games, & other projects in the past, but my ADD-riddled brain won't let me stick to any one thing for very long, so here instead is just a 'whatever hobby stuff happens to have grabbed my attention lately' log. Most recently that's been...

Alright, new test print on the left, this time at 80% scale, and it looks much better with the Mortek Guard's heads & shoulders showing above the sides, and it should be closer, I think, to the scale of the gw studio obr walls. This size is a ~bit~ small for some of the larger models with...