Painting Crystal

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Kezza921

Kezza
Feb 6, 2014
81
Zombies
72
Hey all,
I need advise on how to paint crystal. I have gotten a box of dryads and I am going to paint them crystal not sure which crystal colour to do but I will take anything to just get me started. The current thought I have is the main colour being one colour (say a medium purple) and then the leaves and "cloth" to be a darker version of that colour (in this case a dark purple)

Thanks in advance

P.S. It needs to be something that I can get though quickly since I have taken a 24 hour challenge and I have to get though 20 of them along with 20 other models that will take a lot more effort. That isn't including basing or anything.
 
It all depends to be honest on the colour of said crystal, its it sort of a amethyst look your going for, you want them to shine like crystal?

Now is this just dryads your painting or?...

To be honest I can tell you how to do it and the paints you needs but without a spray gun (I don't use one either) or blending its not going to looks as good.
It will be good, just not top tier display good.

Let me know what your after and I'll point you in the direction of what to do.
 
It all depends to be honest on the colour of said crystal, its it sort of a amethyst look your going for, you want them to shine like crystal?

Now is this just dryads your painting or?...

To be honest I can tell you how to do it and the paints you needs but without a spray gun (I don't use one either) or blending its not going to looks as good.
It will be good, just not top tier display good.

Let me know what your after and I'll point you in the direction of what to do.

I was going to go for Blue (Sapphire) or Purple (Amethyst) and the do need to have a shine.

This is the painting for Dryads.
 
Now you want a heavy dry brush of Nagaroth Night as your base colour over the black of the undercoat, following that dry brush Xereus Purple and then a lighter dry brush of Genestealer Purple.
After this you can do a very light dry brush of Dechala Lilac.

Now you will have to gloss the entire model to give it a shine, to do this use Ard coat but water it down in your pallet so it just barely looks cloudy and coat the model in it everywhere you want it.
in regards to their eyes however I suggest using a contrast colour Bright green like a Moot Green and with their leave to make them look different to the model if you just want the one colour leave them darker and leave them only at the Xereus Purple stage.

This should give you crystal looking trees.
 
Thank you so much, that will be pretty easy to do :)

I do have a few questions though:
Should I do the Moot Green after the Ard Coat?
Should I do anything else to the eyes and mouth because would the plain green be a bit plain?
What is the difference between Heavy, Medium and Light dry brushing? (how much paint should be on the brush?)
 
I would also suggest using a gloss coat at the end. I would also say drybrush only in a single direction when you paint the model. You will get some lines drawn by the brush across any larger surfaces if you do this and it looks more like natural crystal. I would also say not to be scared of doing some very, very light highlights, maybe even white as crystals are very reflective.
 
The reason why I was saying doing the green after the gloss so that it looks like it's inside the crystal but I am not sure :/
 
A good way i've found to do crystal is a light coat of metalic paint, silver or gunmetal of choice depending on how light or dark you want it and then give it a generous coating of tamiya clear red/green/blue/yellow/orange. Add a layer of clear varnish like Ardcoat afterwards and it looks lovely. I will say tamiya green and orange are very dark so only use over silver, tamiya yellow is a bit meh and only good for peridot gem which i doubt you need, tamiya red is amazing and can be used for blood effect too so investing in a pot of it is a good choice, and i have little experience with blue other than it was very thin and needed a few coats. You could do the thicker sections in gunmetal or leadbelcher and the edges in silver or runefang steel to give it the impression of dark depth, or the reverse of that to make it look like it has some faint glow to it. Sadly there's no tamiya clear purple so amethyst may be out of the question. I've never tried mixing them but from what i've read a large amount of red and a single drop of blue might work, but the paint is very temperamental for mixing. Hope that helps.
 
Sorry for the slow reply mate, been busy with work.

Do the moot green before the gloss coat mate, you need them both to shine.
I always advise highlighting the eyes so if you want do part of the corner in a lighter green by mixing moot with white or do the eyes in a darker green and using moot as a highlight.
Its all personal preference.

In dry brushing its all about how much paint you put on the model, a light dry brush only touches the most exposed and raised up areas where as a heavy would be across most of the model (but not painted, dry dragging the brush over the model) and medium would be in between these two.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu