Are Chaos Knights good bases for building mounted Vampires? What about Archaon?

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

ComicBookGuy

Skeleton
Jul 15, 2011
63
Zombies
95
Just curious really - I'm not really keen on any of GWs Vampire character models, as none of them really do it for me in representing the Vampire I want to run.

- Basically I'm looking for a Vampire who looks more human than monstrous, and preferably is also a bit like a knight too. Think Empire General but bulked out a bit more (so that he's imposing) rather than the stupid enormous wings, bald heads and leering faces we've now got for our character models :) (no offence obviously to those who like 'em)

So - obviously the above means a conversion is in order for my Vampire!

There's 3 areas I'm particularly interested in looking at making my Vampire:-

1) Blood Knights - human (depending on the head), knightish, fairly bulky, and also Vampirish in the armour design.

2) Chaos Knights - Bulky, Knightish (evil), not very vampiric (i.e bat armour styles or whatever) but I'm not too fussed here, and some decent options for weapons - trouble is they're obviously covered in chaos symbols :/, and there are no viable head choices (I want to be able to see the face, but I also want a helmet of some kind)

3) Archaon - the final word in bulkiness! An epic horse and weapon to boot - only downside is that he is absoloutely covered in chaos symbols and again I'll need a suitable head which fits with his armour

so - any suggestions or thoughts? I'd like to keep it to GW minis really as I've already looked at other minis and am not really keen - there's also the issue of using other manufacturer minis in the GW shops too.
 
There was a person who made a very good blood knight conversions using chaos knight's so yes it works well.

My army has alot of older figures who look chaos like (from 4th) mostly wight's on foot. so they fit the vampire counts well.

ON archon I would simply remove all the chaos icongraphy with files and hobby knight, I think they brough him out in resin now so it might be easier. I also agree he would look bad ass as vampire and If I remember right someone has done him before on the sight not sure who.

Lastly post up a Plog of your endevours for us to share the adventure with ya.
 
Santawraith said:
There was a person who made a very good blood knight conversions using chaos knight's so yes it works well.

My army has alot of older figures who look chaos like (from 4th) mostly wight's on foot. so they fit the vampire counts well.

ON archon I would simply remove all the chaos icongraphy with files and hobby knight, I think they brough him out in resin now so it might be easier. I also agree he would look bad ass as vampire and If I remember right someone has done him before on the sight not sure who.

Lastly post up a Plog of your endevours for us to share the adventure with ya.

Thanks for the reply :)

This is firmly in the planning stages at the minute, as I'm currently also re-working a Dark Elf List (which I luckily have all the models for), starting a Wood Elf List, and also preparing for Uni exams! xD - so with all that going on it may not even get done - I'm just getting an idea together in case I do decide to go with it.

- I've also posted a 1k army list up on the army lists section if you're interested, so you can check that out there. :thumbsup:

If I remember rightly I did do a Vampire/Archaon conversion a while back, and it did look pretty cool, it's also been the basis of many many fine conversions I've seen online too :). Archaon is my favourite at the moment.

- as a matter of interest, how do I file things away without damaging the model? I've done filing before and it generally leaves things like streakes where I've done it - so I'm fairly apprehensive about doing it to be honest...


Lastly - what sort of Vampire head (and body if you want to make a suggestion there) would be most suitable on the Archaon model? Bear in mind I do want a helmeted head - and one which will fit the bulky size of the rest of the model :)

Thanks.
 
Mad said:
Liquid Green Stuff could fix the filing problem you are having.

How about a Dragon Prince helmet for Archaon?

Hmmm, I have heard good things about liquid GS - are you basically saying that I file away the markings that I don't want - (e.g. whats left of the horns on the horse when I cut them off) and then simply do a layer of Liquid GS - does it always go on super-smooth/blend in with the model?

Dragon Prince Helmet I'm not so sure on... I just think it would look too well...Elvish - it might also not be bulky enough (although on Archaon's body that's probably going to be true of any head we look at...)

A couple of heads I do have are the head of the Vampire on the Abyssal Terror - http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat720003a&prodId=prod1460043a

And also the head of a Blood Knight (I've got a few heads of them actually) - The ones I've got are in the 2nd picture, the top right head, the top left head, and the Castellans head ;)

- Doing a quick test of a Blood Knight head on the old archaon body (which was hacked to bits since the last conversion and so pretty much useless for this one unfortunately - already put it in the recyling bin now - at least he'll do his bit for mother earth) - the ones with the Bat wings did seem to fit... although the body had a tad of Green-stuff stuck in the neck part so it may have been off slightly, and also seemed to fit size-wise too...so I may be onto something there with a Blood Knight head :)

-------------------- Heads aside (I think I'm leaning to a blood knight head actually), can we talk weapons, shields, and the breastplate?

1) Breastplate - Archaon's breast-plate has those skulls across the neck-guard bit - do you think I should leave those on or cut 'em off... I'm undecided either way really, as last time I tried to cut 'em off (albeit on the old metal model) it was a disaster and totally ruined it. And to be fair a few skulls here and there is pretty much normal on evil models :/

2) Shield - Honestly dunno which to use here - archaon's is definitely out, as it's got too much chaos stuff on it and even the basic shape looks chaosy. I did think again of turning to Chaos Knights, with this shield - http://www.bitzbox.co.uk/product_info.php/warriors-chaos-knights-shield-p-5181 as it doesn't look too chaosy (do you think it does?) Doesn't have any chaos symbols on it, and those wailing faces fit perfectly into Vampire Counts! (as say the souls of dead enemies he's killed and bound to the shield)

3) Weapon - again the sword of Archaon looks a bit too chaosy for my liking - it is cool and all, but I just don't want that sword. What alternative weapon would you suggest? I want one which looks more mundane if I'm honest - like an ordinary big sword rather than the one with all the chaosy-texture on it. The ideal solution would be to just convert the current sword Archaon carries to look more mundane, but I dunno how I'd do it...

lastly - Just noticed various bits around the horse which do look chaosy-fied - such as on the reigns, there's the chaos arrow thing, with similar stuff being on the metal rings which go around the horses head - how would I go about either making them look "normal" or removing them entirely?

Oh - sorry, one last thing - how do I mount Archaon's horse on a regular cavalry base (and is such a task possible)

Thanks very much :)
 
Mad said:
Good to hear that the head issue is solved.

About the shield, could a Grave Guard shield work? Or are those perhaps to small...

I think they are probably too small, but thanks for the suggestion ;)

- one alternative would be to not stick a shield on the vampire's arm at all, and to stick it (or find a way to attach it via GS) on the horse itself, specifically to cover the chaos icon... it kills 2 birds in one stone really, as it means I don't have to file away/liquid GS the icon on the horse, as it'll be hidden, can find pretty much any shield I want (although I'll still go for a big one), and don't have to worry about it obscuring areas on the Vampire himself when it comes round to painting :)

Any thoughts on the sword or reigns on the horse?

Thanks.
 
Interesting idea on the shield, I think it could work. Only problem could be that his empty shield arm end up in a kind of awkward pose, I'm not sure this would be an issue, it depends on the model. Dose he hold onto the reigns with that arm? If yes then it should be alright.

For a sword I'm thinking a great sword from somewhere in the range. The swords from empire greatswords could work, or the ones from high elves swordmasters (Island of Blood). Again these might be to small, but since the little guys wield them in to hand it could work. Also be sure to pin whatever sword you settle for in place.

The star-thing on the reigns doesn’t look that hard to file away, a sharp knife could also be of much use.

About liquid green stuff, it is pretty good a smoothing surfaces out, especially if you thin it out with some water. The good thing is that if it doesn't turn out good then you can easily file/scrape that away too and try again.

About the cavalry base I think yes, he can be mounted on one of those. You will just have to do without his cool chaos warped base however, but that is probably just a good thing.
 
Mad said:
Interesting idea on the shield, I think it could work. Only problem could be that his empty shield arm end up in a kind of awkward pose, I'm not sure this would be an issue, it depends on the model. Dose he hold onto the reigns with that arm? If yes then it should be alright.

For a sword I'm thinking a great sword from somewhere in the range. The swords from empire greatswords could work, or the ones from high elves swordmasters (Island of Blood). Again these might be to small, but since the little guys wield them in to hand it could work. Also be sure to pin whatever sword you settle for in place.

The star-thing on the reigns doesn’t look that hard to file away, a sharp knife could also be of much use.

About liquid green stuff, it is pretty good a smoothing surfaces out, especially if you thin it out with some water. The good thing is that if it doesn't turn out good then you can easily file/scrape that away too and try again.

About the cavalry base I think yes, he can be mounted on one of those. You will just have to do without his cool chaos warped base however, but that is probably just a good thing.

The Empty Shield arm does hold onto the reigns ;) - And I think the last Archaon-Vampire Conversion I did I left the shield off and it looked fine - the only problem I see with sticking a shield to the horse is that I think it'd always look a little odd just stuck there... I'm unsure of how I could make it look like it's attached/tied around the horse... - I may just forgoe the shield and break my rule of WYSIWYG on this one, as it would make my life a damn-site easier if I just didn't go with one...

Empire Greatswords might be a good idea, but on closer inspection their design would look odd - even if you cut the blade off at the hilt, then you still have a forward grip thing the guy holding it uses to hold it two handed - if you cut that extra bit off, I think it'd look too short - Elvish swords are again a tad too elvish.


One thing I did think of, which may or may not be a good idea, was simply modifying Archaon's sword (might be helpful if you see a better image of it on the GW site: http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat440108a&prodId=prod1160122a) -see those little spikes that run along the side of it, what I thought was that I could cut those off, leaving me with a fairly normal looking sword, and then (this is another bit which may require liquid GS) - layer up several coats of Liquid GS over the detailing of the sword sot hat it looks like a normal blade... I was thinking i might have to divide the sword up into 4 bits (top left, top right, bottom left, bottom right) so that I keep the <> shape of it, but I dunno whether or not this would work. What do you think? - the chaosy star/point on the hilt of sword and goes into the blade would have to go too, although that might just require a bit of filing.

What sort of stuff would you suggest for filing away? Normal files? Sand paper? - I'm a little stuck on that front really, as I do have some files but I'm unsure how good they are haha.

Yup - I was planning on ditching the chaosy-cracked earth thing.

Thanks for all your help - apologies if it seems like i'm being over-cautious/asking unending questions - just don't want to buy the thing and f*ck it up (since it costs £30).
 
Personally i've never been that keen on Chaos minis as vampires. While they look big and bulky and a good head & shoulders taller than everyone else, it takes away a part of the vampire's mystique. What makes a vampire intimidating in my mind is that their power is a given, but it's not self evident. It just seems more supernatural and malign that an otherwise unremarkable individual could crush an ogre's larynx. :vampire3:
 
There is a great conversion of him floating around where they smoothed out his cloak and horse and replaced the flaming sword of doom with a lance. Looks great IMO
 
I have seen that one actually, I would personally give him krells battle ax but that is just me, I have a soft spot for ax's. Ever since the accident ax's just seem to be my favored weapon of choice. Besides it is what the vampire I see in my head looks like. I think wife needs to order me a figure now. Does he come in finecast?
 
ComicBookGuy said:
Mad said:
Interesting idea on the shield, I think it could work. Only problem could be that his empty shield arm end up in a kind of awkward pose, I'm not sure this would be an issue, it depends on the model. Dose he hold onto the reigns with that arm? If yes then it should be alright.

For a sword I'm thinking a great sword from somewhere in the range. The swords from empire greatswords could work, or the ones from high elves swordmasters (Island of Blood). Again these might be to small, but since the little guys wield them in to hand it could work. Also be sure to pin whatever sword you settle for in place.

The star-thing on the reigns doesn’t look that hard to file away, a sharp knife could also be of much use.

About liquid green stuff, it is pretty good a smoothing surfaces out, especially if you thin it out with some water. The good thing is that if it doesn't turn out good then you can easily file/scrape that away too and try again.

About the cavalry base I think yes, he can be mounted on one of those. You will just have to do without his cool chaos warped base however, but that is probably just a good thing.

The Empty Shield arm does hold onto the reigns ;) - And I think the last Archaon-Vampire Conversion I did I left the shield off and it looked fine - the only problem I see with sticking a shield to the horse is that I think it'd always look a little odd just stuck there... I'm unsure of how I could make it look like it's attached/tied around the horse... - I may just forgoe the shield and break my rule of WYSIWYG on this one, as it would make my life a damn-site easier if I just didn't go with one...

Empire Greatswords might be a good idea, but on closer inspection their design would look odd - even if you cut the blade off at the hilt, then you still have a forward grip thing the guy holding it uses to hold it two handed - if you cut that extra bit off, I think it'd look too short - Elvish swords are again a tad too elvish.


One thing I did think of, which may or may not be a good idea, was simply modifying Archaon's sword (might be helpful if you see a better image of it on the GW site: http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat440108a&prodId=prod1160122a) -see those little spikes that run along the side of it, what I thought was that I could cut those off, leaving me with a fairly normal looking sword, and then (this is another bit which may require liquid GS) - layer up several coats of Liquid GS over the detailing of the sword sot hat it looks like a normal blade... I was thinking i might have to divide the sword up into 4 bits (top left, top right, bottom left, bottom right) so that I keep the <> shape of it, but I dunno whether or not this would work. What do you think? - the chaosy star/point on the hilt of sword and goes into the blade would have to go too, although that might just require a bit of filing.

What sort of stuff would you suggest for filing away? Normal files? Sand paper? - I'm a little stuck on that front really, as I do have some files but I'm unsure how good they are haha.

Yup - I was planning on ditching the chaosy-cracked earth thing.

Thanks for all your help - apologies if it seems like i'm being over-cautious/asking unending questions - just don't want to buy the thing and f*ck it up (since it costs £30).

That sword idea doesn’t not sound too hard to do really, I always thought his sword was way more daemon like but what do you know. The spike should be easy to get rid of, since he is finecast. Though I'm not sure I understand what you mean by "divide the sword up into 4 bits"...

For filing normal files would work pretty well. Dull files would probably just take a little longer to work with but should give a smoother finish. I would also recommend using a very sharp knife to carve/cut (I don't really know the appropriate word for it in English) the icons away.
 
Wow...lot of replies haha :D

See your point on the ordinary looking/concealed power thing too - guess we're of two different opinions - while I like my vampires (my favourite bloodline is Blood Dragons) to look like a normal knight, warrior etc, I like them to also look imposing/difficult if not impossible to defeat in combat.

There's also the fact that the new blood knight models are also massive compared to the old Blood Dragon Vampire models - they just make a mockery of the old vampires :( - in a way that's kinda sad really...as I remember a time when the vast majority of hero models (bar special characters) stood out from the crowd, but weren't over-sized to do it... ah well, times change I suppose.

The real real ideal for me would be to create a vampire which is similar to the Blood Dragon artwork in the edition before last's army book :) - either the one with the axe (can't seem to find that artwork :(, but I think it is next to the story of the Blood Dragons, or the one with the sword and head of a knight (with the vampire's horse in the background).

To be fair that may to an extent be doable... as I do have a Blood knight/vampire lord conversion sitting around somewhere (it's just a simple Castellan torso on regular BK horse with a BK head swap kind of thing...good but not quite...lordy enough) - if I removed the head (or possibly torso) and replaced it with the one of the old Blood Dragon vampire models' torso (I'm thinking the one with the lance) it might just be there... I just get the feeling that the torso would look out of proportion on the BK legs.

Anyway... I'll keep looking for ideas, but my heart for the moment is set on an archaon conversion, as I just like that idea alot lol.
 
Mad said:
ComicBookGuy said:
Mad said:
Interesting idea on the shield, I think it could work. Only problem could be that his empty shield arm end up in a kind of awkward pose, I'm not sure this would be an issue, it depends on the model. Dose he hold onto the reigns with that arm? If yes then it should be alright.

For a sword I'm thinking a great sword from somewhere in the range. The swords from empire greatswords could work, or the ones from high elves swordmasters (Island of Blood). Again these might be to small, but since the little guys wield them in to hand it could work. Also be sure to pin whatever sword you settle for in place.

The star-thing on the reigns doesn’t look that hard to file away, a sharp knife could also be of much use.

About liquid green stuff, it is pretty good a smoothing surfaces out, especially if you thin it out with some water. The good thing is that if it doesn't turn out good then you can easily file/scrape that away too and try again.

About the cavalry base I think yes, he can be mounted on one of those. You will just have to do without his cool chaos warped base however, but that is probably just a good thing.

The Empty Shield arm does hold onto the reigns ;) - And I think the last Archaon-Vampire Conversion I did I left the shield off and it looked fine - the only problem I see with sticking a shield to the horse is that I think it'd always look a little odd just stuck there... I'm unsure of how I could make it look like it's attached/tied around the horse... - I may just forgoe the shield and break my rule of WYSIWYG on this one, as it would make my life a damn-site easier if I just didn't go with one...

Empire Greatswords might be a good idea, but on closer inspection their design would look odd - even if you cut the blade off at the hilt, then you still have a forward grip thing the guy holding it uses to hold it two handed - if you cut that extra bit off, I think it'd look too short - Elvish swords are again a tad too elvish.


One thing I did think of, which may or may not be a good idea, was simply modifying Archaon's sword (might be helpful if you see a better image of it on the GW site: http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat440108a&prodId=prod1160122a) -see those little spikes that run along the side of it, what I thought was that I could cut those off, leaving me with a fairly normal looking sword, and then (this is another bit which may require liquid GS) - layer up several coats of Liquid GS over the detailing of the sword sot hat it looks like a normal blade... I was thinking i might have to divide the sword up into 4 bits (top left, top right, bottom left, bottom right) so that I keep the <> shape of it, but I dunno whether or not this would work. What do you think? - the chaosy star/point on the hilt of sword and goes into the blade would have to go too, although that might just require a bit of filing.

What sort of stuff would you suggest for filing away? Normal files? Sand paper? - I'm a little stuck on that front really, as I do have some files but I'm unsure how good they are haha.

Yup - I was planning on ditching the chaosy-cracked earth thing.

Thanks for all your help - apologies if it seems like i'm being over-cautious/asking unending questions - just don't want to buy the thing and f*ck it up (since it costs £30).

That sword idea doesn’t not sound too hard to do really, I always thought his sword was way more daemon like but what do you know. The spike should be easy to get rid of, since he is finecast. Though I'm not sure I understand what you mean by "divide the sword up into 4 bits"...

For filing normal files would work pretty well. Dull files would probably just take a little longer to work with but should give a smoother finish. I would also recommend using a very sharp knife to carve/cut (I don't really know the appropriate word for it in English) the icons away.

By the 4 parts thing I mean that when you look at a sword it's not necessarily just a flat smooth blade (although I think it varies from sword to sword), it's kind of a diamond shape? - I might just be a bat short of a belfry here though... as it probably isn't an issue... either way, do you think GSing over the weird flaming effect could turn it into a simple flat blade type sword rather than some weird possessed demon sword?

Any ideas for techniques for cutting/carving/filing? I've hardly ever done it see despite considerable years doing the hobby (odd I know) so I'm a complete nooby in that area. - I do have files, and the GW hobby blade/putty tool thing (http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat470006a&prodId=prod1095464) - which I believe is actually a sculpting tool... so probably not good to use... and I do also believe somewhere I've got proper hobby knives (one of these things: http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat470006a&prodId=prod840893)

Thanks for your help :)
 
A combination of cutting of the spikes and green stuffing should fix the sword.

And techniques for cutting... I don't know how to describe it really. Every been a scout or something? When cutting away details and stuff I do pretty much the same thing as when I was a scout(ish) and carved stuff (like butter knifes) out of fresh wood with a sharp knife. I don't know, it just comes natural to me...

With filing it much harder to get access to some areas, and it is slower. Generally it is better to carve/cut the big stuff away with a knife and the smooth it out with a file. I have never used sand paper on any figure but I guess it could work.
 
I know this is over a month old but i figured i would post pics of my wip archaon conversions. Maybe it will help, maybe it wont.

Mounted first.

Torso with filed down sword, body and new head.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0475_1.webp


Other angles.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0476_1.webp

ai376.photobucket.com_albums_oo203_foyt21_IMAG0478_1.webp


Horse on regular cavalry base.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0479_1.webp

ai376.photobucket.com_albums_oo203_foyt21_IMAG0480_1.webp


Liquid greenstuff for horse icon, then painted.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0481.webp


Reins star cut and filed.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0482_1.webp


Foot version sword, icon, 20mm base and head swap.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0472.webp

ai376.photobucket.com_albums_oo203_foyt21_IMAG0474.webp


Comparison of new helmet to original helmet.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0486_1.webp

Archaon has a teeny head!

Both shields filed down.
ai376.photobucket.com_albums_oo203_foyt21_IMAG0483_1.webp


Hope that helps...
 
Here's what I did for my Archaeon-converted Blood Dragon Lord. Archaeon is a great model to work with; the Chaos details are just enough that they are easily removable so he can work for a mounted general from almost any army.

a1.bp.blogspot.com__i234l_TVfN4_T0vcYIt4RtI_AAAAAAAAAqc_y_2wRpD_EP8_s1600_Seth_on_Nightmare.webp


The spiky bits and chaos star were removed from the steed and I used putty to achieve the fiery mane and tail. The head is from the old Blood Dragon on Winged Nightmare, and his sword is modeled from Mephiston's force sword (40K, Blood Angels) with the bat-crossguard of Manfred von Carstein's weapon (the old version of the model). The shield is a Chaos Knight's shield with the iconography filed away, decorated with a skeleton shield icon and Warmaster bat wings.

I didn't bother removing the Chaos arrow from the reigns, but Wolfen's solution of filing off the arrow part looks like a good idea.

For a shield, you might try a plastic Chaos Warrior shield. It will give you the size you want, and it's much easier to file away the detail than on a metal shield. For the horse, I think everyone's already weighed in on this, but use clippers/side cutters to clip away the spikes on the horse (as flush as you can get them), and then file the nubs smooth.

I would definitely recommend mounting him on a scenic cavalry base to raise him up a bit. This horse is massive, plus he's got all that cape. I was having a hard time fitting him into my Black Knights.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu