Best Quality Paint Brush?

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Kadyr777

Zombie
May 3, 2015
2
Queensland
Zombies
2
So the wife and I have been using the Citadel detail brushes, however they just fray and split so easily which gets SO frustrating! Anyways we would like to invest in the best quality tiniest/detail brush out there but aren't sure on brands, so some advice would be appreciated please and thank you. :)
 
@Kadyr777 I know what you mean. I use the Citadel brushes too and have had the same issue (with the standard brush and detail brush in particular, which is disappointing as they aren't exactly cheap!).

I'm not sure of brand names, but my next port of call will be an art store. They've got to have something decent knocking around there...
 
Windsor & Newton Series 7 Finest Sable is the best brush money can buy (sizes 0-3 are about what you need). There are lesser brands, but you should at least look for kolinski sable brushes. I think Raphael makes a kolinski sable brush that's pretty good.

Edit: As far as the size, if the brush is too small, it can't hold enough paint & moisture to maintain a wet tip. (The idea of the "single hair brush" is silly, because the paint would dry in a single hair before you got it to the model. Same with teeny-tiny brush tips.) A good brush will have a sharp point, and maintain its point even when wet or holding paint, so the Series 7 #0 will be sharp enough, while still large enough to hold some paint. Keeping the paint thinned also helps prevent it from drying in the brush hair.

Series 7s are so good that I know some people who can paint eyes with a #3, the points are that sharp.
 
Last edited:
  • Like
Reactions: Kadyr777
Thanks for your replies, I'm glad Farmer that we aren't the only ones having that issue.. Thank you especially Infernal, that's exactly what I was asking for "best brush money can buy." I also appreciate the extra detail you went into with choosing brushes, thank you so much for your help. I'll be buying Windsor and Newton asap! Also, when cleaning the brushes out, is it best to run my fingers through the bristles to ensure all of the paint gets out when rinsing? Or is that too much force to the bristles and I should just rinse?
 
Last edited:
No problem!

Some additional info: When buying the Series 7 brush, ask for a cup of water to test it out. If it's a "proper" fine arts store and not Michael's or something, you shouldn't have a problem. The brushes are expensive (like $20/ brush), so you want to make sure they're in good shape, and the store should accommodate you.

Dip the brush in the water and tap the handle against your finger to "flick" out the excess water. Without even touching the hairs, the brush should snap to a nice point. Then, dip it and wipe the brush on the back of your hand to bring it to a point (like if you were wiping, twisting the brush with paint on your pallet to bring it to a point).

Then, brush the hairs across your finger so they bend a little (only about halfway up the hairs; don't crush them). The brush should again hold its point. If it splits, then it's a bad brush and you should select another. After you go across your finger, the brush should also have a nice snap back to a straight point.

You can also make some circular brush strokes with the water on your hand or a piece of paper and watch how the hairs behave. A good brush will hold its point. If it's splitting a lot or frays out, get a different one.

For cleaning them, I recommend Ivory soap & water. To take care of it, wash it after every use to prevent paint from drying up toward the ferrule (the metal part), and maybe even take a break in the middle of long painting sessions, as excess paint will be gumming up in the hairs. Obviously, try to keep the paint from getting all the way up to where the hair meets the ferrule.

When washing it, swish it out in the water, then go to the sink and brush the hairs on a bar of soap. Use cool to lukewarm water (not hot; it can loosen the glue over time). You'll see all kinds of crud come out. gently massage the hairs (in the palm of your hand, use a twisting method similar to bringing the brush to a point on the pallet. You can also gently massage the hairs with your fingers. Just be gentle. Don't crush, press, grind, or scrub the hairs around.

Eventually, you'll get to a point where no more color is coming off the brush, and it'll be clean. Bring it to a point and keep the plastic sleeve on it. It's best to store the brush point down in a brush holder. (Not resting on the point, mind you. or even in a cup if the protector sleeve is on it; something could poke up into the sleeve). They make clips that can hold brushes like that. The reason point down is best is because that allows any moisture in the hairs to drain down and out, as opposed to drying in the ferrule. If upside down is too much of a hassle, then store it on its side (laying on the desk is preferable to standing it point-up in a cup.)

If you take care of it, the brush should last a long time. Later in the brush's life, when it's starting to lose its perfect point you can try washing and using some hair conditioner. Wash the brush and apply the conditioner, rinse and then point the brush. Sable is animal hair, so the conditioner should help retain its shape a little.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu