Blood Knight Complaints

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

ancalagon06

Ghoul
Jun 30, 2008
176
Texas
Zombies
70
So, I finally recieved my box of blood knights, and I've realized some things about them already:

1) There's quite a few parts that got so bent from just being moved around, that bending them back runs the risk of snapping them off.

2) The horses are not universal. Each half has its own specific mate.

3) Even if they have to be specifically fitted, there's so much flashing left over from the mold process that it seems to take half an hour of careful trimming to get them to snug up.

4) After you do all that, there's STILL huge ugly gaps left along the bottom of the horse.

5) The torsos aren't universal either. The picture guide it comes with is moderately helpful in indicating what torso goes where, but you still have to repeat steps 2-4 listed above to get it to fit.

6) WHAT IS WITH THE FARKING BATWING HELMETS?!?!?

Honestly, the picture of them looks amazing, but the models themselves aren't so impressive. Especially considering their dollar cost, and the time I've already invested in them, I'm pretty enraged at the chutzpa of GW on this. If they're going to charge me $17 per model, at least they could make sure it all fits together right!
 
I had to exchange my first box (pain in the ass btw) cause i got 4 full knights and half a horse of 2 other ones that didnt synch up, had extra kastelan head sprue but no torsoe and AAAAAAAAAAAAAAAAAAAAA dont remind me about the 4 hours i spent cleaning flash before i noticed the last horse didn't fit together.
 
I can't believe how badly made the models are, especially given the price. I had to get a friend who used to work for GW to put mine together for me - I reckoned they were too expensive for me to make a mess of them. Don't buy them unless you're a competent modeller would be my advice. I wish now I'd used something like Empire or Bretonnian horses with Dark Elf knights instead.
 
I also had the dubious pleasure of building Blood Knights, and yes all your points are true, I used a hell of a lot of green stuff and time getting mine put together.

I don't regret it however, they look fantastic :)
 
Having had a night's rest to consider things, I belive that, considering the amazingly dynamic poses of them (the horses look like they've gone insane!) the cost was well worth it. HOWEVER, they should have done a better job of designing them so they go to gether better.

2 questions:

1) How can I get rid of the superfluous slot in the base? Greenstuff?

2) What's a non-gw alternative to greenstuff?

3) My Kastellen's mount is super wobbly, how can I improve on it?
 
ancalagon06 said:
2 questions:

1) How can I get rid of the superfluous slot in the base? Greenstuff?

2) What's a non-gw alternative to greenstuff?

3) My Kastellen's mount is super wobbly, how can I improve on it?

Answer #1 - Glue a strip of the box over the slot ... once you base the base with sand and grass ... you dont even notice it.

Answer #2 - There is a non-gw made greenstuff ... check ebay, you can get 3 times are much for half the cost.

Answer #3 - I imagine its wobbly b/c the piece you stuck in the slot is poking out to far ... file it down to be flush with the base. If I'm wrong, ignore my suggestion :D

I bought and built 1 Blood Knight (I use it as a Dread Knight Vampire Hero/Lord) ... it was a bit of a pain to put together, involved a nights work, a few cm of greenstuff and patience ... but damn does it look sexy completed. :D

~Roke
 
I'm buying some blood knights off my friend for a lot less then the GW price, so I'll soon be able to complain about them :D. Well they can't be the worst models to put together, the new skellys are very fragile, as with the grave guard. They don't even stay together when you sit on them!
 
Trust me fluffy, they are the worst models I have seen for putting together, they need a lot of filing just to fit them together and then a lot of GS to fill in the gaps.
 
That does sound bad, but there are worse then that. Putting together an Ork Dreadnought in 40K. Single most difficult piece I've ever done. Since then, I smashed it, and took it for bitz for other things
 
ancalagon06 said:
Having had a night's rest to consider things, I belive that, considering the amazingly dynamic poses of them (the horses look like they've gone insane!) the cost was well worth it. HOWEVER, they should have done a better job of designing them so they go to gether better.

2 questions:

1) How can I get rid of the superfluous slot in the base? Greenstuff?

2) What's a non-gw alternative to greenstuff?

3) My Kastellen's mount is super wobbly, how can I improve on it?

1) Yes, greenstuff should do it.

2)its called kneadite, GW don't make the greenstuff, they just repackage and sell it. You can get it online for alot less than at GW, in rlls up to 3 feet in length.

3)I don't know, I have no blood knights.

TCOTD
 
Given that GW's metal mounted LoTR range is dreadfully cast (HUGE gaps, iffy casting, etc), I'm not overly surprised to hear that these models aren't fitting together particularly well.

1) How can I get rid of the superfluous slot in the base? Greenstuff?

I always use blutack for filling base slots.

2) What's a non-gw alternative to greenstuff?

As others have said, go to ebay. I buy mine by the inch and get 3-4 times for my money what I'd get from GW.
 
I've discovered the wonders of Home Depot. Turns out they sell an epoxy designed to repair damaged wood molding that is exactly the same as greenstuff. Only tan. So I don't even have to order it online and wait for it to arrive.

Pictures to follow!
 
Any home improvement store should carry the stuff. It's called wood repair epoxy. They also make steel repair epoxy, underwater repair epoxy, and general repair epoxy.
 
I have put the blood knights together and found that it wasn't as bad as you guys are saying. Has anyone ever tried to put together a scraplauncher? Holy crap! That makes blood knights seem like nothing. They do require more work than most even bending the reins of one side of the horse to match the other but not too bad for and experienced modeler.
I found that the kastellan along with the rest fit nice and snug into the slot base gut if yours is wobly then try bending the slot piece either direction to make it tighter. Then fill in with a lot of super glue or green stuff and that should hold it steady. If it is the joint at the foot that is loose then you might be screwed.
 
In the UK we have a substance called Milliput (it may exist elsewhere, but I am parochial British and know little of Foreign Parts), which does a similar job to Green Stuff but comes in a stonking great rod for the same price. Takes ages to set though. That could be the underwater repair resin of which others have spoken.

I had to re-sculpt every single joint on a Keeper of Secrets once. I think it might be par for the course with large metal kits.
 
The Bloodknights were a nightmare to put together, and craved a lot of greenstuffing and pinning to sit tight. But boy are they cool! Thankfully a friend did all that for me, I just cleaned them up.
 
I put together 6 of the models, 4 rand and file, and 2 standard bearers :lol: A quick addition of plastic bells (i.e. a musician later) they were fine. Not the worst models to make, but not the best. On a scale of 1 to 10 I'd give them a 7 for putting together. Skellys are worse ;)
 
Mine actually fits pretty good. What bothers me is that there was no right arm, head or shield for my Kastellan!!!!
 
On the same subject as Blood Knights, Ive been wondering if anyone else is planning on using alternative miniatures to the Blood Knights released with the new Vampire Counts, as they don't really fit my theme?, If so what miniatures are you planning to convert.
 
GW are good at fixing their models mistakes I have to say. Got a dodgy blister pack once, so they gave me another one for free :D

I doubt you'd be so lucky with Blood Knights lol
 
The Dark Sheep said:
Chobber: go to your Local GW store and complain (I got a blister with a missing arm once, and I got to keep the old blister + I got a new one for free :grin:).

That's the problem, there is no GW in Denmark, so I bought my stuff from their online store...
Also, talking about buying green stuff from eBay, I had some problems.I filled out information about me, the creditcard number and all that, but eBay kept denying my phone number even though I had the +45 first that you need to call Denmark.
And I didn't either understand the other payment method. The cashiers check/money order. What is that?
I know that this is off-topic, but I need help ._.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu