Dogmar's painting log - Back from the dead!

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
RE: Dogmar's painting log - More WIP shots of Green Knight!

i like how your painting technique isn't just a load of washes, i've always steered clear of them as to me it was cheating :( dry brushing and highlighting always gave me a better result.

all your stuff looks pretty amazing :)
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Thank you for the more or less polite suggestion to get myself a few washes. In fact I will do so tomorrow (local store is closed on mondays *sigh*). On my list is: Devlan mud, Badhab black, either Thakra green or the blue thing, new brushes, vallejos equivalent to codex grey and skull white (those are getting empty too fast ;) )

As for my green knight: I worked on the armor today and am really satisfied with the result. The final accents and redefining of the areas where I had a shaky hand will have to wait until I made my purchases, as the current resources do not allow as much detail as I want on him.
Next steps:
Light wash of badhab black to get more shades on the edges.
Highlight with light grey.
Pick out shiny spots with pure white.

Here the WIP pics (only did his armour so far, was too lazy to do the barding as well today):
ai811.photobucket.com_albums_zz34_Dogmar001_P1000818.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000817.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000816.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000819.webp


C&C welcome.
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

I use Bicarbonate of Soda mixed with PVA for snow basing, Gives a great effect. but can wear off with transport, heres what it looks like on the model of Valkia I converted. I've not noticed leaching or yellowing yet and it was painted in january.
I love how crisp your blues are. It never works well for me.
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Thank you, desfer! Surely I can but you will be rather disappointed about it:
In steps I did the following:
-basecoat with a very dark grey (say 4 chaos black:1 codex grey)
-little trick of me: wait until your basecoat has dried. then take only water and gently put it on all armor areas. Make sure it is a very thin coat. Then hold it in an angle you like in the light and see where the water shines. This is the areas we want to highlight.
-make sure you know where your highlights will be and do this:
-blend from basecoat to lighter grey (roughly 3 chaos black : 1 codex grey)
-blend from lighter grey to even lighter grey until you reach pure codex grey
-take some time to rework details if you accidentall overpainted them
-blend from codex grey to lighter grey (approximately fortress grey, I used codex grey + ascending amouts of skull white)

This is what I've done so far. The next steps are in my earlier post.

If you really feel like it you can add thin glazes of whichever colour you like before applying the final white highlights. This way you can make your armour (or blade) look more magical or just dirty. For pics you should check out my other thread Link . There are also more tips concerning the technique.

Have fun trying it out.

Dogmar

Edit: Thank you General Lee, the key in painting blues is not to add too much white as it makes the blue not shine any more. At least that's what I experienced. As for the basing: Bicarbonate of soda = baking powder?! Or what is it. I'm unfamiliar with the English technical expressions as my chemistry and physics classes are in German ;). If you say it does not get miscoloured I might try it out. The other tutorial using GW-snow, glue and water seems do work as well though. Before I buy anything I have to calculate which alternative is cheaper. ;)
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Your making some really good progress with the green knights, wash wise I was actually thing about black was for the horse and certainly some blue was for the blue bits.

As for the feather all I can suggest is you take a look at this picture

m150007a_99120202013_EmpStateTroopsMPPK_873x627.jpg


I have actually used devlun mud on my feather before but I guess it depends on what look you want for feathers.
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Bicarbonate of soda is NaHCO3, Baking powder adds an acid to NaHCO3 to improve its bubbling in recipies.
bicarb is £2.40 a kilo. gw snow is £5 per 15g.
Bicarb is one of my modeling staples, there's a small tub on my work bench all the time. not only will it do snow basing, it acts as a superglue accelerator increasing the strength of bonds and mixed in very small quantities with dark flesh or vermin brown gives a textured rust effect. Rust

the steel on his armour looks sweet. I'll be following his progress carefully
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

@logan: Take a look at the wings of the Blood Angels Sanguinarian Guard (<-name?). I wanted the feathers to look similar, with a light blue shading. Devlan mud seems to be everybody's darling. I might try that in the future for feathers, just not on this particular mini. Thank you anyway :)

@desfer: as some wise people around here told me, NMM or generally any advanced painting technique rewards bravery. And I can only second that. Just give it a go on an unimportant test mini and see how it works for you. As I said above in my Thread in the "Dying to Help" section (also a link in the previous post) you can find another tutorial and examples.

@Lee: Thank you for the insight, bicarbonate of soda is "Natrium-hydrogen-carbonat" in German. Your suggestions sound very good, especially the rust effect is just plain awesome. I will look around where I can pick up that stuff. Being in an advanced chemistry class I'm just a little worried that it will turn acidic when combined with water - or water based glue respectively. NaHCO3 + H20 -> H30+ +CO3- +Na+ which is an acidic substance. If it works for you I'm going to try this definitely, just some general concern. I can't suppress the scientist within me xD. As for storing it, will it draw water out of the air and thus form crystals? If so, I'll try to store it in a box with vacuum (tupperware or something xD)
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Awesome job so far on that guy. The NMM is coming along wonderfully. I can't wait to see the finished result.

Also, here's a trick I learned for painting blues and highlighting them. Don't mix a white- it's much too bright. Use a lighter, but more blue color like spacewolves gray. It works!

Keep up the great work bud!

All the best,

Jake
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Here goes the next update, but it's still a long way to go.

I worked on the armour again, finished the barding as well and added the golden parts.

ai811.photobucket.com_albums_zz34_Dogmar001_P1000824.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000820.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000821.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000822.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000823.webp


I'm still unsure on the golden parts, they somehow never turn out exactly the way I want them. While the NMM on the hilt is actually quite good the belt is awful imo, but I'm unable to pull it off any better. I guess the sculpt is not innocent as well, since imho the belt is really lacking detail. It is supposed to be textured, but this is not the case everywhere around the model. For that reason I found the armourplates on the horse a pain to paint as well.

Next up is the freehands on the barding, which will take a while again. Good thing I have a fresh set of brushes.
Then the sword needs to be finished, but I'm unsure if I should really go for an OSL on it. Seeing that the armour looks so good now, I'm afraid to ruin it. Still, OSL is an awesome technique that could make the model even more outstanding.

Any opinions on that?

@ Lee: Still need some tips concerning bicarbonate storing and where to get it.

Other C&C is of course very welcome

Cheers,

Dogmar

Edit: the tail needs a little reworking, I might do so once the rest is finished.
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Good grief, that is some nice looking brush work! The nmm is coming on great, I think your being a bit harsh on your gold work, it looks very nice to me. And whats to become of the sword? Im looking forward to seeing your take on the glowing spectral blade. Keep up the great work :thumbsup:
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Really impressive work. The armour is fantastically done and I think the gold looks great as well. You really are being too hard on yourself.
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

That is some seriously good NMM work my friend, I am actually very tempted to give ago, hmmm
 
RE: Dogmar's painting log - More WIP shots of Green Knight!

Thank you all for the kind comments.

I still have to finish the shield, but that will probably take a while. Next point on my to-do-list is some wraiths and/or spirit hosts.

Here the pics of the finished green knight (as I said, without shield for now):

ai811.photobucket.com_albums_zz34_Dogmar001_P1000831.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000825.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000826.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000828.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000829.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000830.webp


I decided against the OSL on the blade, as I was too afaid to ruin the NMM on this guy. Also it felt like too much on special effects, the NMM is eye-catching enough as it is. On my next hero vamp I'll probably to the metal parts with metallic colours and then add an OSL effect. Also I did not make as many freehands as on the original green knight for 2 reasons:
1. It would kind of distract from the really important parts of the model
2. I'm simply not good enough on freehands to make it look good ;)

Feel free to give suggestions on how to improve him, or to leave comments on how you like him.

Cheers,

Dogmar

Edit: Did the base with a mix of bicarbonate of soda, water, and normal glue (still unsure how English people call it - it is good to glue wood, is white and dries clear).
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Really nice Dogmar. I might be tempted to go a tiny bit brighter on the sword on the edge closest to his head. spot of scorpion green/rotting flesh. It would match with the highlight on his helm. The glue is PVA glue.
well done, very impressive model.
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Lovely work, nothing to add but well done its great :thumbsup: Do you mean PVA glue in the base mix? It looks very good, im stealing that idea!
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Very nice, he looks great. I like the checker on the horse's reins. I'm not too sure about the extreme highlighting on the sword, the lines seem a little thick, and I think I would have kept the diagonal lines running in the same direction, but overall a really great model.
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Thank you for the kind comments. I was unsure about the highlighting on the blade as well and I might rework / darken it a bit to make it look smoother.

Did some ethereals with Seth's technique tonight. Pics are going to follow tomorrow. I seriously have to get more new paints, as my old ones start to get empty.

Cheers,

Dogmar
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Finished 6 wraiths today. They're an easy conversion from LotR models, but while I'm happy with the converting part I'm not with the painting. I used the ethereal technique described in the Invocation 6 and to me it looks way too unclean.

Thoughts? Or other techniques that will provide a better / cleaner result?
ai811.photobucket.com_albums_zz34_Dogmar001_P1000834.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000833.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000832.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000835.webp


Cheers,

Dogmar
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

The green man is awesome. The painting skill there shows great skill and i a model to be proud of.
For the wraiths i would say that the shading needs to start lower down as the model is too dark. (However that maybe the photo) The painting on it is nice.
 
RE: Dogmar's painting log - Update: Wraith, C&C appreciated!

The Green/blue knight looks amazing to me! A really great job, keep up the great work.
 
RE: Dogmar's painting log - Pictures of finished Green Knight online!

Goggalor said:
The green man is awesome. The painting skill there shows great skill and i a model to be proud of.
Looking great the knight and the wraith are perfect (i love your wraith to e honest more :)) A bit darker colour in the base of the wraith i think would really showed it off much better (just an opinion).Keep it up :))
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu