Help: Snow-based themes

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
Feb 13, 2012
43
Aberdeen, UK
Zombies
33
Greetings. I'm new to the hobby and a novice painter. I'm coming up with the background fluff for my army but I do know that it will hail from a snowbound tundra. In an attempt to stem the amount of exploratory painting I'll need to do, I'm hoping that I can turn to the more experienced painters here to help develop some paint schemes.

I'm purchasing the battalion at the end of the month, along with a Vampire Count. I figure that a white base coat would make most sense but from there, I'm at a bit of a loss. I want to convey a frozen quality to the skin of my Ghouls and Dire Wolves. I'm not sure how to do the cold look on the skeletons, although I am toying with the idea of having their eyes and between their ribs glow with some kind of electric blue to symbolise the be romantic magic that keeps them together.

Anyone have a similar theme and/or any tips?
 
Ok, first of all this is the wrong section as there should be painting logs and not really question threads in this section. However if you feel like it you could change the title and use this thread as a painting log once you obtain your models.

On the question: For snow basing I use bicarbonate of soda mixed with PVA glue and some water until you get a consistency that you are happy with and apply it to the base or whatever part of the model you want to have snow on. Works a lot better than baking powder, as baking powder changes it's colour over time.

In order to make a model look frozen it might be a good idea to add tiny amounts of blue to the colour you paint with or to give the model a blue glaze (very VERY thin layer of paint) to resemble frozen skin. As for the glowing magic inside the model. I like the idea but especially as a new gamer it is very hard to pull of. Doing the eyes is perfectly fine and relatively easy, but achieving a convincing looking glow from inside the ribs is very hard and I wouldn't want to do this to 100 models or even more - and that from me as a very dedicated painter. I'd go for just the eyes if I were you.

Have a look at my painting log, as I have a blue / ice themed army as well. Didn't bother too much with glow effects really, but has a clean cold blue and snow bases.

Hope this helps.

Dogmar
 
For the skeletons you could go with a nice icy blue highlighted with tinges of white on shields and so on. Also, you could try making some icicles and putting them all over the place, if that interests you.
 
While working with my snow-themed army I use alot of blues, and blue white/grey colors, like astronomican grey from GW and pale greyblue from Vallejo, for my skeletons. Asurmen blue from Gw is an invaluable tool aswell. Metal with a wash from asurmen has a great cold look. For skin you could paint it pale with a purple hue.
For snow I use the same recipe as Dogmar but with a bit of white color added into the mix.
 
For basing you could take a look at this Tutorial of untitled_musketeer. I don't know if I should be the one posting this, but since it hasn't been done yet...

Like others have said blue collours work really good in a snow themed army, due to it being one of the cold collours, however purple might also be an option. I'm going for a purple theme myself.

Hope that helps.
I'd like to see some pictures when you start painting, so we could all give you some more specific tips.
 
No worries cuzzy its all about help each other with the hobby.

They are right this is in the wrong section and Ill move it after I Respond to it.

For snow basing, I use gw's snow, and mix it with elmer's glue. Then I glob it where I want snow, and sprinkle a little more on top. (Comes out looking like iced snow covered with fresh snow)

Like everyone said, blue and purple are great cold colors.
An invaluable color to me is reaper's leather white. (It's white tinged just slightly with grey.)
 
I've been going along a similar theme, mainly based on the Scourge from Warcraft.

[video=youtube]http://www.youtube.com/watch?v=BCr7y4SLhck[/video]

That might help a bit
 
Viscount Nostrus said:
Thanks for the tips guys. I'll give all of these a try. I'm thinking the ghouls might be a blue skin with light purple highlights.

Don't hesitate to screw around and see what happens, either. I mean, you can always strip a model that you've painted if you don't like it with some "Simple Green" and it'll be good as new (yes, even plastics).

For Ghouls, I'd TOTALLY take the easy way out;

Prime white
Wash with GW Asurmen Blue wash (just COAT the bugger!)
Let dry...
if it's not looking right, wash it again. repeat until you're suitably happy.
Take a white paint & mix it with a blue paint. Mix it until it's slightly LIGHTER than the blue on your model. Pick out highlights (biceps, nose, top of head/forehead, shoulders, etc).
Give it one more wash.

DONE.

Hope it helps.
Brahm
 
Thanks Brahm, that was pretty much what I was thinking for the ghouls. I'm thinking a brilliant blue for the eyes to represent the necromantic magic at work. I'm also wondering whether a darker blue wash would work for giving the spaces between the ribs of my skeletons that kind of glowing effect that I'm after.

As an aside, my General is to be a fallen Witch Hunter. Killed his prey, but was mortally wounded and then turned. I'm looking for a decent 28mm model to act as this character but the GW models are a bit plain for the centre piece model of my army. Anyone know of any decent stand-in models?
 
This might sound funny but there is one trick that you can use to make your troops "frosty".
It is a problem with spray varnishes which is called "frosting" :perv:
You can check out effect here: Frosting
Note that I can't say how to achieve this effect and I am aware that it is not reliable but you might want to try it out:innocent:
 
Viscount Nostrus said:
Thanks Brahm, that was pretty much what I was thinking for the ghouls. I'm thinking a brilliant blue for the eyes to represent the necromantic magic at work. I'm also wondering whether a darker blue wash would work for giving the spaces between the ribs of my skeletons that kind of glowing effect that I'm after.

As an aside, my General is to be a fallen Witch Hunter. Killed his prey, but was mortally wounded and then turned. I'm looking for a decent 28mm model to act as this character but the GW models are a bit plain for the centre piece model of my army. Anyone know of any decent stand-in models?

Look into the Mordheim range. They had kick-arse models for Witch Hunters that you can totally tweak to be "da new ded boss".

Brahm
 
Oh definitely the Witch Hunter Captain. Some blood on the sword, but with the ice cold skin paint job. I'll need to figure out some way to change him up to a Vampire Lord later on but he'll work brilliantly as a Vampire Count.

In fact the entire warband could be turned to certain roles within the army. Lieutenants of some description...
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu