How do you stop paint chipping?

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Atty1988

Skeleton
Nov 28, 2010
57
Zombies
60
Hey all, just wondering how all of you stop paint chipping on metal models because personally im a tad clumsy and chip my models here and there.
Iv got the gloss varnish stuff from GW but i find it leaves things kinda shiny the last time i used it so does anybody have any other suggestions??

All help appreciated :thumbsup:
 
The more gloss in the varnish, the more durable it will be, so a strong, protective coat will be high gloss.

However, the gloss finish can be reduced or eliminated by applying a dull coat such as testors dull cote. Army painter has a similiar spray on product.

Personally I prefer dull cote as it allows some minor shine to show through. However, if you want a totally matte coat go with the army painter.

Also, the amount of dulling spray you apply with have a substantial effect on the final shine, so start lightly with the can at a good distance and then apply more if desired.
 
I prefer to apply a matt varnish with a brush as it tends to giver a harder, thicker coat. Stopping chips is really hard, particularly if you game a lot. My advice is to not be too extravagant when painting your gaming minis cause it just makes touching them up even harder. On the subject of touching up, whenever I paint I use a little notebook. I write the name of the mini at the top and then rough mix estimates for each painting stage. It makes recreating the colours that little bit easier, particularly if you go for a long absence before buying a new unit!
 
Yep, I second the idea of first doing a gloss varnish coat or two before finishing up with a matte varnish. I like the sprays kind over a brush on type, but either way it never hurts to be safe, and if carefully done, it wont even be evident when you finish it.

As a side note... if you have flocked bases or use railroad ballast on them, I tend to give them a wash of good ol' store bought polycryllic varnish, let it dry, then matte seal everything. Never had anything fall of one of my base.... ever... And the matte sealant covers any shine perfectly.... however be aware that it will change the final appearance of your basing materials a bit, making them look a little darker. Something just to be aware of in the planning stage.

Speaking of which... I like that notebook idea, untitled_musketeer... never remember how I painted a figure if I ever want to do it again later, d'ohh!! Consider it stolen!! Hehehehe!! :thumbsup:
 
I've got to say I've never found a matte finish I liked better than Testors Matte finish. Never a problem with it... always gives consistent finishes and seems to be compatible with just about every paint and glue I've used it with.

If price is a concern, I also like Valspar's Premium clear flat enamel finish, available in a big old can at most hardware stores. Much better price wise, and just about as good (a little less perfectly flat... but still good)..... usually best if you are spraying a big project like a combat board or model.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu