Painting fire

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Humaneater

Black Knight
Apr 5, 2010
395
Zombies
439
So, i'm painting the Skaven Warlord from Island of Blood, and I can't get the flame torch right - I've seen some cool flames which start with yellow in the recesses an work up to a dark red on the highlights (sounds odd, but it looks right as opposed to red in the cracks and yellow highlights). SO, umm, anyone got ideas how best to achieve this? I can't seem to... :(
 
Great tutorial desfer.

Yes, most people paint fire exactly the wrong way around. They start with red as a base and then work their way up to yellow and white. This is how normal highlighting goes, from dark to bright. However if you look at a fire (say camp-fire size as candles are too small) you realize that the hottest parts (which are in the center mostly) are the brightest ones whereas the darker (more orange-redish) areas are not as hot and thus more on the outer areas. It's a bit like hot steel, if you heat it up it turns red. Heat it up even more and it gets orange. And at some point it turns yellow/white. Just imagine where your fire would be hottest and paint the hightlights there.

Pretty much a sum up of the tutorial, but I was in a writing mood.

Cheers
 
Start with white, than work up with yellow in every areas except deepest ones. Cover the more raised areas from top to halfway down the deepest part with some orange, leaving some of the yellow showing. Then drybrush the most raised areas with red. As a final very light drybrush, you may add some black to the very points of the flames to simulate ash and smoke starting to raise. This is the simple and fast way, and varying colours you can do this for lava, burning rocks, spiritual flames (i.e. blue, green...).

If you want a more natural looking, you may mix every step of painting in a 1:1 ratio; like: white, white + yellow, yellow, yellow + orange, and so on... takes more time, more work, but looks great in the end. The important thig is what you already have pointed, it is a backwards highlight (from light tone to dark tone).
 
The easiest way I've found to paint realistic looking fire:base coat the area in orange, dry brush the bottom yellow, dry brush the top red, then wash about half of the remaining orange with a wash made from the same red as the top of the flame.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu