Patina

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Monkey's_Uncle

Black Knight
Aug 2, 2010
397
Somewhere in the Welsh Marches
Zombies
258
Hi Guys!
I've been painting a test model for my grave guard and I've just got to doing the metals.
My question to you is this, what is an easy and effective way of painting a patina onto copper etc?

My mate recommended a wash of watered down scaly green, but seeing as mine has all dried up and I'm not in a position to get any more (new paints) I wondered whether you guys had any tips?

Also any recommendations for painting copper or bronze would be great as I've always struggled with it (rather sad really, considering Lizzies are my other army).

Cheers, Monkey

P.S> I thought I would just mention that I'm after a TMM technique here, I do not have the time to paint them all NMM sadly, plus I think NMM looks a bit off for 'old' metals.
 
Well I think I can help here as I've had a similar problem lately.

As for the patina, scaly green really was an awesome color for that, I still have some of it lying around trying to protect it from drying up (damn GW paint-pots). If you don't have any scaly green and want the patina to look as realistic as possible you want a green one for copper and a black/blue/turquoise one for bronze with black being most realistic, but colours just look that much better.

For the green approach there is some new colour that is quite close to scaly green, try Sotek Green or Thunderhawk Blue for a darker shade and add some Hawk Turquoise or Kabalite Green for the Highlights. For a more blue-ish approach I use pure Hawk Turquoise with a tiny tiny bit of Ice Blue for the Highlights. Usually having layers that don't cover completely are enough for shading there as you're only painting smaller areas and you want a worn out look to begin with.

For TMM there are two ways: the extremely fast one and the extremely cool but difficult one... well and something kind of in between that I tend to use for my Dark Eldar.

1. fast: Apply a metallic base colour, this depends on whether you have some of the new paints or not as well as your desired metal, steel, gold, bronze...whichever you prefer.
Give the whole thing a wash of Badab Black, but don't overdo it as you only want to pick out the recesses with this. Then follow it up with a second more generous wash of Devlan Mud to get some dirt on it. Then apply your rust / verdigris /patina of choice and finish with a highlight of the base colour to pick out details, make sure to blend it in as good as you can except for the parts where you really want crisp edges. If you feel that's not enough to one metallic colour brighter up to mithril silver if you so wish to highlight the edges a bit more.

2. extremely cool but difficult:
This works very much like NMM, as you said you don't want that I won't go into much detail but generally you paint the model exactly as you would using NMM but using only metallic colours and thin glazes of others.

3. The in-between way: Works almost like the fast approach but you spend a little more time shading and highlighting the metal, you're not limited to metallic colours here, but it is a good idea to focus on those colours as the metal would look matte if you overdid it with normal colours. For an example of the looks check out my DE (link in sig). Note though that I've improved the technique since then. Top thing I found out is: Use metallics as much as possible and use regular colours for the extreme shades, the matte finish adds depth but would ruin the metallic effect if overdone.

Hope this helps,

Dogmar
 
Thanks for the tips.
My problem with copper was that the base colour never went on evenly, and I ended up with little blobs of colour over black.
Now my old paints have dried up however, I'll 'ave to procure some of the new ones.

Have you had a chance to try the new metallics yet?
And if so, would you say they go on all right?

Cheers,
 
I've not yet tried the new metallics however I plan to get the new foundation gold as it is normal for the old metallics to not cover evenly, especially gold and bronze are an issue. The new ones are said to cover way better however I can't prove this yet.

The thing with copper and all non-silver metallics from the old range is that you don't paint it over black directly. basecoat the surface roughly with a colour that comes as close to the metallic one as you can get... except that it's not metallic obviously. For gold and copper I suggest a yellow or red-ish brown respectively. Then you work your metallic colour onto that with several thin layers, it normally takes at least 2 to cover smoothly even with the surface below having a similar colour. If you don't thin the paint you'll end up with these blobs and you don't want that. Don't thin it too much however since the pigments start to group up easily because they are bigger than the regular pigments. In other words metallic colour can't be thinned down that much, but still needs a bit of water.

So get yourself some new paints to replace the dried out ones and post up some results, it's easier to work from there. If you have any more questions however feel free to ask them :)

Cheers,

Dogmar
 
You also asked for any tips instead of scaly green. I recently had the same problem and mixed something close to it. I used snot green and enchanted blue. Also if I remember correctly it was a bit too dark for my tastes, so I added a bit of grey.
 
Monkey said:
Thanks for the tips.
My problem with copper was that the base colour never went on evenly, and I ended up with little blobs of colour over black.
Now my old paints have dried up however, I'll 'ave to procure some of the new ones.

Have you had a chance to try the new metallics yet?
And if so, would you say they go on all right?

Cheers,

Do a couple layers, tends to work better that way
 
Currently doing a NMM copper coloured weapon. Might post pics later if it all pans out.
 
When I do very rusty metals I like to paint the rust color first, then drybrush metallics over. So for copper, I'd start with a dark/medium turquoise, then wash with a lighter one, and then drybrush the main copper color and highlight twice or three times with increasing amounts of light silver.

I haven't tried rusty NMM yet, but I can say for certain that this technique wont work there ;)
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu