Removing paint on your models

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Ventra

Zombie
Nov 11, 2013
39
Zombies
34
Hey all.

I've recently gotten back into painting and modelling.
Still trying to work my way up to becoming a better painter.

So I want to re-paint my models with new techniques, different colours etc. Does anyone know of a good way to remove the paint on plastic models?

I don't want to be spraying or painting over as it will ruin details on the models the more often you do this.

Thanks.
 
Thanks for the tip.

Just have to look out for that. I live in Europe (belgium) so we might not have that particular product in stores.
 
For those people such as myself that don't have the luxury of Simple Green, Methylated Spirit works a treat and it's safe on plastic, resin and metal. It also works as a pretty good de-greaser. I'll often give my models a quick dip and a gentle scrub with a toothbrush followed by a rinse in boiled (not hot, leave until lukewram) water before I prime them.

bartoline-methylated-spirit-500ml-6B55590.webp
 
U.M 's system is a very good idea. All moulding, whatever the material, requires a release agent, usually an oil. This should always be washed off before painting.
 
Well to help, all that simple green is vs. any other degreaser is an environmentaly safe degreaser. Because of this is tends to be a lot more gental on the plastic (I tend to let my models soak for a week in the stuff, it removes the primer too). I wouldn't do this if I had a stronger degreaser, I'd just be careful with it as it can take off some of the super fine details. Also, be sure to use a super soft toothbrush and don't rub to harsh. I've broken off spikes and such when working on my Darkeldar doing stuff like this.
 
You can soak in dettol or a pine oil based cleaning product, wear gloves as it will dry your skin out and is readily available here in the UK.
 
Theerteen said:
They have special traders (or is sellers the right word? not sure :P ) in several countries, which do all the order and sending stuff. In germany is only one, I am just lucky it is in my hometown area. I fear Belgium hasn't one, I didn't found one on the website. Sorry :/

As for the simple green product. Would that be the "All-Purpose Wipes" product?
 
When I used to use oil based paints, I soaked my metal models in gasoline and scrubbed with an old brush. For the water based accrylics, use PineSol or pine cleaner and do the same. Though I dont know about plastic models they might be too fragile.

Gasoline will also clean the overly primed metal ebay models that you see sometimes.

To weaken the crazy glue bonds on bigger metal models, I actually boiled the metal model in water, then usually the model would just fall apart, ready to be reglued and properly pinned. Cause everyone starts off with just glueing straight away without pinning for some reason.
 
This shit right here.

350-816078-847__1.webp


Of if you live in Europe

dettol-first-aid-antiseptic-liquid-500ml.webp


No water! Just dump it in a containter with a lid, drop your models straight in the undiluted product, walk away, come back in a week and rub the models with a DRY toothbrush. Once you have like 90% of the paint off, THEN soak them in warm soapy water, get the last little bits off, then rinse with cold water.

Leave them to dry overnight and spray in the morning.

The no water is especially important with Dettol. Treat stripping models with Dettol like Gremlins. Don`t get them wet. It will gunk the paint up something horrid.

If you can find the blue Simple Green, that shit is bananas. I`ve stripped models in like a couple of hours with that stuff that came down to bare plastic/metal.
 
Minty said:
Detol. Just as Ripper said.

Don't bother searching for Simple Green, it's mythical and even if it did exist it cannot be better than detol.

Psssh. I have models sitting in a tub of simple green right now. They sell it at Canadian Tire and Real Canadian Superstore.

And it is better than Dettol because you don't have to worry about a drop of water falling in the bucket and ruining all your models.
 
I just removed paint from 35 space marines and 2 tanks...I all post the pics tomorrow of what happened in my balcony.....
However I tried everything and my way to go is this;
Original brown dettol in a Tupperware for 12-24 hrs. Brush with gloves,outside your home me with old cloths and in ambient that can get dirty or using a plastic sheet on your working surface.
Wash out in another Tupperware with dettol the mini and brush again.
Let it dry.
Bath it in green formula cleaner for an hr.
Brush it again with another brush.
Let it dry.
Base coat it again and have fun.
Do not EVER,EVER!!! Make contact of dettol and water for any reason.EVER!
I'm lucky enough to live alone and I just tell u I have a whole new set of unexpected "painting clothes"....
 
One of the best tools to have is an ultrasonic scrubber, you can fill it with simple green or whatever you wish to use as well.

I don't own one myself, but a friend has one that he also uses to clean the parts of his airbrush and make a few bucks cleaning jewelery he finds for cheap and resale after getting everything off of them, and he lets me use it...I think his cost about $25, and he's considered getting a second of the same type for more use with the stuff he does, though that would be more of a water one with a bit of soap to speed up cleaning other things so he wouldn't need to keep switching out fluid.

Just beware that a lot of glue gets removed and you may need to clean the thing out...and use the basket.
 
Ripper said:
Minty said:
Detol. Just as Ripper said.

Don't bother searching for Simple Green, it's mythical and even if it did exist it cannot be better than detol.

Psssh. I have models sitting in a tub of simple green right now. They sell it at Canadian Tire and Real Canadian Superstore.

I'm pretty sure Canada is mythical too. You're not trying to tell me there's a real place where milk comes in plastic bags?
 
Minty said:
Ripper said:
Minty said:
Detol. Just as Ripper said.

Don't bother searching for Simple Green, it's mythical and even if it did exist it cannot be better than detol.

Psssh. I have models sitting in a tub of simple green right now. They sell it at Canadian Tire and Real Canadian Superstore.

I'm pretty sure Canada is mythical too. You're not trying to tell me there's a real place where milk comes in plastic bags?

The milk in plastic bags thing is true, but only on the east coast. They're crazy over there.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu