Hi everyone
I've recently got back into the hobby, after a terribly long hiatus since 6th edition (I'm not going to include my failed attempt at 8th edition woodelves). I've decided that vampire counts look very cool, so I'll give them a go.
I've posted a list or two on the forums at 1,500 points to get me started & I'm almost settled on the models I'll need to build my army.
In a nutshell, my army consists of:
2 Necromancers
Wight King
3 x 20 Zombies (standard)
30 Crypt Ghouls (Ghast
8 Crypt horrors
Mortis Engine or Terrorgheist
These were the first models to arrive & the army book (sorry for the large images):
I started building the zombies first:
First rank
I plan on doing a lot of unit filler, mini dioramas like this one, just to ease the monotony & boredom:
Each individual base has been magnetised. I drilled a small hole in the base before glueing the model to it, then lastly fitting the magnet in the hole:
The first, of many, finished zombie models (minus the paint):
And the magnetised bases. This movement tray wont be the one I use, turns out the 4x5 formation of zombies doesn't fit as snugly as the 4x5 clanrats formation:
My Wight King & possible vampire model. I think the vampire model is an old Rackham Confrontation model, but I'm not quite sure. The statue is an old LotR statue from years ago & I may incorporate it into the ghoul or Crypt Horrors unit:
Most of the models haven't been finished yet. It's only after I post hi res photos when I notice a lot of mouldlines I hadn't noticed before
. I also need to do a bit of greenstuff work, the Mantic models don't fit as nicely together as I would have liked, also it's very difficult to have them standing completely straight.
The next models I'll be getting will be Crypt Horrors by Titan forge:
If you want to view my army list, you can find it here:
https://www.vampirecounts.net/Thread-1-500-PT-Beginners-army-need-advice?pid=391937#pid391937
Does anyone have any ideas on how to make a Mantic Zombie standard bearer? I'd rather not just glue a banner pole into an open hand, but I'm open to all other suggestions
I've recently got back into the hobby, after a terribly long hiatus since 6th edition (I'm not going to include my failed attempt at 8th edition woodelves). I've decided that vampire counts look very cool, so I'll give them a go.
I've posted a list or two on the forums at 1,500 points to get me started & I'm almost settled on the models I'll need to build my army.
In a nutshell, my army consists of:
2 Necromancers
Wight King
3 x 20 Zombies (standard)
30 Crypt Ghouls (Ghast
8 Crypt horrors
Mortis Engine or Terrorgheist
These were the first models to arrive & the army book (sorry for the large images):
I started building the zombies first:
First rank
I plan on doing a lot of unit filler, mini dioramas like this one, just to ease the monotony & boredom:
Each individual base has been magnetised. I drilled a small hole in the base before glueing the model to it, then lastly fitting the magnet in the hole:
The first, of many, finished zombie models (minus the paint):
And the magnetised bases. This movement tray wont be the one I use, turns out the 4x5 formation of zombies doesn't fit as snugly as the 4x5 clanrats formation:
My Wight King & possible vampire model. I think the vampire model is an old Rackham Confrontation model, but I'm not quite sure. The statue is an old LotR statue from years ago & I may incorporate it into the ghoul or Crypt Horrors unit:
Most of the models haven't been finished yet. It's only after I post hi res photos when I notice a lot of mouldlines I hadn't noticed before
The next models I'll be getting will be Crypt Horrors by Titan forge:
If you want to view my army list, you can find it here:
https://www.vampirecounts.net/Thread-1-500-PT-Beginners-army-need-advice?pid=391937#pid391937
Does anyone have any ideas on how to make a Mantic Zombie standard bearer? I'd rather not just glue a banner pole into an open hand, but I'm open to all other suggestions