Sculpting Spirit Clouds?

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
Oct 8, 2014
4
Zombies
4
... or clouds/fog in general, really. A lot of the tutorials have broken links or deleted images. Was just wondering if anyone had some tips or tricks on how to fill out some gaps with DIY spirit blobs.
 
I can't help you with sculpting but if you're after an ethereal/mist effect you could use some drawn-out cotton in places around the model once it's painted and ready. You can get a nice swirling effect around the miniature if you experiment around with it enough. Not very useful for filling out gaps or other spaces though..
 
It all depends on if you mean a host is what you are trying to make or more like the cloud the mortis engine carries folks on?
If the former your wanting to make a normally find a base first which it will be built from, a torso, head etc, from there I will build a thin frame using paperclips drilled into the base model, after this I will roll out my green stuff flat and place it across the areas of the frame I wan it before working it into shape with a sculpting tool.
Personally I find this the easiest way to do things.
 
Thanks for the tips guys. Duke, I am trying to sculpt the fog from the mortis engine/coven throne, so any advice one that would be great.
 
I would cut a piece of plasticard, foamex or somthing similar to roughly the right shape. The mortis engine always looked the a wave to me, like the things reaching out from it were being pulled back under again and other things were rising over them. Use spare arms and skulls to make it look like things reaching out and grasping, put some of them on wire to make them stick out farther, use some wire to make trailing bits, then greenstuff over the whole thing to blend all the parts together. Build up a few parts like flowing capes, add vague impressions of faces like vlad's cloak, generally go nuts with the details. You could take a quick pressmold of the front of a skull, pump them out with greenstuff, and cover the thing in them before greenstuffing over it to smooth it out.It would give it the look like there's a lot of dead things just under the surface waiting for a chance to reach out and pull someone in.
 
Markond has the right of it, once you build a rough shape its all down to the fine detail.
Expanding foam is generally an easy thing to work with for this, as is foam board as you can melt it with a heat torch and reshape it.

The problem is though that you can't ever expect perfect in any piece but look at it as a whole until its done.
 
Thanks for all the advice. For now, I'm just filling in the gaps with green stuff covered skull bits. Hopefully I can move on later on with fully free sculpted clouds.
 
Markond has the right of it, once you build a rough shape its all down to the fine detail.
Expanding foam is generally an easy thing to work with for this, as is foam board as you can melt it with a heat torch and reshape it.

The problem is though that you can't ever expect perfect in any piece but look at it as a whole until its done.

If you do melt foam with a torch/paint stripper gun be sure to do it outside on a windy day. The fumes from polystyrene are super toxic.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu