Simple paint question

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

helemaalnicks

Grave Guard
Mar 22, 2014
249
Zombies
204
Hi,

I couldn't find an answer to this question through google, so I'm just trying my luck here.

I don't have black base paint (Vallejo glossy or Citadel Abaddon Black), but I do have the citadel imperial primer (which is also very black). Can I use that instead for a basecoat? Should I maybe thin it more?
 
Yes.

Hang on a tick...

When you say basecoat, have you already primed your mini (with spray-paint, normally)?

If so, what colour did you prime it.

If you primed it black you won't need another basecoat.

If you've not primed it at all, you need to get some acrylic spray paint.

If you have primed it some other colour then a watered down coat of black is appropriate.


Anyhoo - most folks, especially when they're starting, find it helpful to have a test mini. Some luckless model that is used to experiment with any paint-techniques you might be currious about.

Any mini will do. Bits of sprue will do.
 
Ok, thanks, didn't think of using a sprue actually :redface: I'll try it.

So far I've only used white spray yet (for high elves), but I have imperial primer from a paint-set with some high elves in it I bought. For the skaven I'm going to try to find a brown primer.

The models I'm painting right now are all kind of testmodels. Not that they're badly painted, but I'm trying out new techniques and getting used to how the paint works and stuff. Right now I'm painting the high elf starter set, then the skaven, and then I hopefully feel ready to start painting my actual army.

Would just be an annoyance if the primer will look different from the other paint, horses need to be kind of glossy.
 
Some will probably disagree, but I've had good results with some of the newer acrylic car spray primers. Black, brown, white and grey are easily available, and much cheaper than modelling sprays. The chemistry seems to be identical.
 
Like Minty, I use Halfords, but make sure it's acrylic.
Theerteen, sorry, I don't have the tech to post pictures, but I think any car accessory shop should have something similar.
 
It didn't work very well on the sprue, normal pain covers much better. So I'm gonna pick up some glossy black tomorrow, thanks for the suggestions.
 
Daaamn I feel cheap. I use car primer from poundland... £1 for 300ml and it's just awesome!

I think you've found out the answer now, but I don't think Imperial Primer would be too good as a base coat... It's a strange paint that I've had horrible luck with.

Though I'd advise you to buy plain black (rather than glossy black) paints, and buy some gloss varnish. You'll find many more uses for matte black, and then you can gloss it as you see fit!
 
Glossy black is the name of the vallejo black paint. I bought it already btw. Still had to paint it 3-4 times for it to cover though, but that's ok.
 
Goooooo to poundland!!! They don't sell Garlic either, and I don't think anyone holy has ever gone near them... so it's perfectly safe for us Vamps!
 
I have another question, decided to just use the same thread, since it's a simple question. I've painted about 500 points of high elves, and it takes forever to do them properly, takes me a couple of hours per model actually.

Now I want to paint my VC's as well as I possibly can, so that'll take forever as well. But I also want to use painted models, so I was thinking, maybe I should first slap a simple basecoat on everything, no washes, no drybrushing or highlights, then paint them individually as soon as all my models are assembled and have the basecoat. I'm anxious to play VC, but I don't want to disrespect my opponents (anymore).

So my question is, is there a good way to clean your models, remove dust, particles, etc., without damaging the basecoat? Should I just use a large brush for it, or use water as well?
 
helemaalnicks said:
I have another question, decided to just use the same thread, since it's a simple question. I've painted about 500 points of high elves, and it takes forever to do them properly, takes me a couple of hours per model actually.

Now I want to paint my VC's as well as I possibly can, so that'll take forever as well. But I also want to use painted models, so I was thinking, maybe I should first slap a simple basecoat on everything, no washes, no drybrushing or highlights, then paint them individually as soon as all my models are assembled and have the basecoat. I'm anxious to play VC, but I don't want to disrespect my opponents (anymore).

So my question is, is there a good way to clean your models, remove dust, particles, etc., without damaging the basecoat? Should I just use a large brush for it, or use water as well?

I'd imagine just a large, fairly stiff (not like toothbrush stiff, but not super soft either), brush should do you well for cleaning.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu