Skeletal Wolves

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Norvaldov

Zombie
Sep 15, 2009
10
Zombies
13
I joined a while back stating I was going to make a skeletal themed army, and after finally getting some dire wolves I could start removing their flesh, more or less. Using surgically shortened horses for their bodies and a dire wolf head and some green stuff made me wind up with this (yes, it's just the one angle, I didnt do the right side yet :) )

ai30.photobucket.com_albums_c303_Norvald_VC_VC002R.webp


Problem is though, I have no green-stuff experience. The stuff that's on there now could pass for hair, but it looks nothing like the original. Is this a problem that will "go away" with painting or does anyone have any neat advice on how to do this properly?

Thanks.
 
I think it looks nice for a first attempt at sculpting hair. I don't think that, when painted, it distracts that much. All in all I'd say it's a succesful coversion.

If I look at the hair from that Dire Wolf, it seems as if there are little ''lumps'' of hair are placed on a base. From there, there were grooves added so they look like different parts of hair. And that's what I will suggest to you.

I advise to make a flat base next time. If you want, you can allow that to dry first before continuing. Then add long balls which is round on one side and sharp tipped on the other, just like a simple version of the Dire Wolf hair. The round side goes on the flat base. Then you add grooves so they look like different hairs.

Having advised that, I'm not expert at this. I've only ever used GS before and that was for an entirely (but successful!) different purpose. :zombie2:
 
At first glance the hair looked quite a bit different from the original, but on closer inspection it looks really similar. Except for that your GS hair seems to be somewhat finer, It's not much of a problem.

And I almost forgot: It looks great :).
 
Thanks for the positive feedback, I would have replied sooner but I had hoped I'd be able to paint it and present the finished product (as well as crappy painting skills) by now. Alas, I have not, but I promise to do so once it is actually finished. Currently, my plan is to do the bones normally (mine are pretty standard bleached bone with an ink wash I guess) and some kind of ghostly blueish mane. There, that should put the bar about ten meters above what I'm capable of accomplishing.

Master Vampire: Your way sounds like it would yield results similar to the actual sculped hair, and I will probably attempt to do something similar on future models (I have nine more to make anyways).

I guess I can throw in the right side of the model for good measure (I decided to remove the ears too), although I cant help but feel it looks better when not blown up to the size of your hand. At least it's in focus this time.

ai30.photobucket.com_albums_c303_Norvald_VC_VC006R.webp
 
I love what you're doing but here's some advice on sculpting the hair.

1. Apply your GS and make sure it's still nice and bendy.
2. Dip your sculpting tool in water regulary (very important!).
3. With your sculpting tool drag slightly wavey lines (don't go mad with the wavey lines) down the entire length of the GS.
4. Repeat part 3 again but don't drag down quite as far as you did previously.
5. Keep repeating steps 3 and 4 as necessary.

Basically you drag your wavey line from top to bottom. Then you do it again but don't drag it quite as close to the bottom as you did previously. Also remember that you don't want fur to be in a straight line, so be brave and drag wavey lines across the other lines.

As stupid as it sounds use your tool and run it down the scuplted lines GW did for their fur, just to give you an idea of how they got their effect and how you can try to blend yours in with it.

I'm not saying the above is the best method but it worked well for me.

I realise it's hard to envisage in words but I don't have any work in progress photos of how I did the fur on my Werewolves.

It's not the clearest of pictures but the Werewolf on the left shows what I mean on his right (i.e. our left) shoulder):

wolves2.jpg
 
Thanks for some more great feedback.

As I stated in the original post, my green stuff experience is non-existent, so try not to break down in tears when I confirm I didnt use water to prevent the gs sticking to the tool. It was annoying, but I didnt even consider adding moisture to prevent it, mainly because I'm an idiot. As for the tool, I basically used the knife for that job as well, seeing as I dont own a set of sculpting tools (should be fairly obvious by the results), and my ambitions really werent all that high.

Thanks for the quick guide on sculpting hair, Bug16, and as both you and the Disciple of Nagash mentioned, I will be using water from now on. I am sure the link Soren provided will be very useful as well, thank you.
 
Some people use K-Y lube, Vasoline, or lip balm. Just jiving you more options. You have a very nice start. I'll be waiting for updates. Take lots of pics.

And if you would like to make some sculpting tools (there is a eBook too):
http://sculptingtools.blogspot.com/2009/09/free-ebook-make-your-own-sculpting.html
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu