Swamp Bases?

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

TheComedian

Zombie
Sep 15, 2012
36
Zombies
27
Hey guys,
I've decided to go with a swamp/voodoo-ish them with my Vampire Counts, but don't know an easy or cheap way to make this happen. Does anybody have any experience or good ideas???
 
Forlorn did a great one(Here) as well this is the base I started with with my swamp bases..! But as always I wanted my own personal feel to it..

Build up with greenstuff, added watered down PVC, dip it in fine grain sand. This was painted with a base of brown (i have a large pot of cheap acrylic colour from my local hobbyshop), then wash with Scorched Brown, highligt with Kommando Khaki and Bleached bone. This was done to areas were that would be dry.

If you want the greenstuff part to look wet: Use te same Base colour, then dip a rather wet (large headed) brush in Vallejo pigments Burnt Umber and apply on the sanded areas. Fasten it with Gloss Varnish which gives it a really nice wet look..

The reason for chosing the pigments is to get the exact same colour when weathering my models boots, pants, cloaks and the like.. The powder will dry a light colour if applied and let it dry normally fastened with Gloss varnish it will get te same Dark brown muddy colour..!

Water/muddy water.. Wash in browns, sepias and greens.. Don't overdo it as the "water" on top of it wont cover it all that much.

Then mix 1:1:1:3 Gryphonne Sepia / Devlan Mud / Ogryn Flesh / water. This is then mixed into Vallejo Water effects (the one you can shape) that will then dry with a brown/murky finish instead of totally clear one.

As for plants the Army Painters Tufts are a must..!

Hope this helped, good luck with the swamp theme you wont regret it!

Finished result can be seen here
 
Yeah everyone here has good ideas. My simple advice: build up some of the area of the bases with green stuff or maybe plasticard or even just ballast sand- depending how marshy and flat you want it. And for the water, paint in browns and greens with maybe the slightest hint of blues or yellows for a swampy feel and then cover it in 'Ard Coat in sweeping strokes to direct the "flow" of the water. Finishing with The Army Painter tufts looks great. I personally use a giant shaker of grass flock that I picked up for about $4 and it will last forever (along with my shaker of sand)..

My army is still coming together and based very simply and cheaply. I sand (the glue is essentially Elmer's glue) and then spray paint everything in white. Then go over the bases with Dryad Bark to hold down the sand (watering your brush a bit before each application also helps get the paint into the crevices without globbing or using too much paint).
Next I drybrush Snakebite Leather (will have a different name by now, it's just a light brown)
Finish with some more dots of glue and add flock.
Donezo. lol good when you have a whole army to do.
 
Woah thanks guys, some of these tutorials and examples are amazing. I will definitely be picking up some new material. Heres one more question though: i have already glued my horrors (well 3 of them) to thier bases, is it too late to work with it. They may not be raised but i think i could find room for them :slapface:
 
TheComedian said:
Woah thanks guys, some of these tutorials and examples are amazing. I will definitely be picking up some new material. Heres one more question though: i have already glued my horrors (well 3 of them) to thier bases, is it too late to work with it. They may not be raised but i think i could find room for them :slapface:

Not at all, just greenstuff close to their feet and have them stand in the "water". the water part is not raised anyway so should be very doable with good results!
 
If you weren't looking to sculpt up the bases, then glue and sand shouldn't be a problem. Also, if you go heavy on the glue around their feet, it will also give the impression they are stuck in the mud when you add sand.

Word of advice, find a small box to hold them over when adding sand and flock. It will catch all the excess and then you can pour it back into your container. That's what I do and my sand and flock will probably last forever...
 
Hello there, I've written a couple of tutorials about swamp bases, which may be of some use;

Painting:
http://www.elementgames.co.uk/painting-tutorials/261-southland-swamp-tutorial-basing

Building:
http://www.elementgames.co.uk/painting-tutorials/254-how-to-make-swamp-bases

I hope they come in handy!

Byron
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu