Techniques of Death

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Aren

Crypt Horror
Sep 22, 2010
520
Zombies
453
Greetings all, I shall get straigh to the point and not ramble on like in the rest of my threads: I need good, reliable and quick methods of getting minis painted. Ive been playing warhammer 40k for 2 years now and fantasy for 1 year. Really Ive been painting for 1 year only because I play Necrons so I was just base coating, drybrushing,base coating,drybrushing. Ive stared VC and I thought "hey, Im not too bad at this, certainly takes longer than a Necron but its doable) and so I thought until I finished with the GG and Skellies plus Varghulf and was faced with a Character. The armour-ok, cloak weapon and tree-ok but the skin- awful! Ive recently learned highlighting (I am new after all)and its going ok, but I need some tips for skin, and any techniques that should get a VC army looking good for tabletop and fast, Im not going to be a golden Deamon/bat winner but I want an ok looking army for games. Please could you offer any help??? Yet again I have gone on for ages, but i needed that xD
 
Hey there,

I'm more of a perfectionist and character painter so painting at a a tabletop level is something that I find hard! For me there are a few things you can do to get your army looking sweet without much effort.

Firstly consistency. This is so important. Write down rough paint guides/colour recipes for everything in your army. This be something as simple as:

'Cloth = Base Scab Red/Mechrite Red 50/50, Highlight Blood Red/Mechrite Red 50/50, Final Highlight Blood Red/Blazing Orange 50/50 Shade Asurmen Blue'

This makes sure that whilst your painting can improve, nothing lloks massively different. Having consistent colours really helps to create a uniform looking army even if over a period of time your painting gets better.
But it doesn't just stop at painting my friend, oh no! The consistency has to follow through with the basing. Yes make the base for your characters atnd out a little more by using slate or something else that's cool, but keep your scatters, flocks and sand the same!

Secondly use no more than 3 highlights. In the grand scheme of an army you look at the army as a whole or maybe a unit but not each individual piece. Therefore you can be more 'lazy' in your blending etc. Just make sure you're consistent!



For painting a unit there is a method I have used in the past. Essentially you rank your models prior to painting. Once in this order it is vital you keep them in this order. Then you prioritise your painting detail. For the purposes of this example lets say your unit is 16 men strong or 4x4.

The guys on the front row, the command, should have the most detail. This kinda makes sense since the command usually have the most detail. Paint them fully, use 3 highlights all that jazz.

The second row is a little further back and slightly obstructed by the first. This means that you only really need to pay attention to about 3/4 of the model. 3 highlights for all prominent areas such as hands, heads, shoulders, weapons etc and 2 for everywhere else.

The third row back is probably the most covered. This essentially means that you can skimp even more and only worry about 1/2 the dude. From the waist up stick with 2 highlights and for the legs just do them in the basecolour you're using.

The back row are a little different. The front needs to be painted rather like the third row, however since the backs are exposed you need to paint them like you did the first row. You might also want to apply this to the dudes at the side.


I know that sounds really complicated, and to be honest, I probably haven't explained it that well but it really does make painting a unit a little quicker by skimping where you can.

Finally you can do a lot with a simple wash and a highlight. Whatever colour you use, wash it with a suitable glaze and just pick out the detail with a lighter colour than the base. This is often all you need for a great looking table army.


Hope this is useful, these are just a few secrets I've used in the past.

Cheers,

u_m
 
No worries, if you have any other questions I'd be happy to have a go at answering them. In the mean time just keep us all posted with your work. Pics are good! Seeing your work progress is by far the best way we can guide you and give you feedback ;)

Cheers,

u_m
 
If you want to paint models to a relatively high standard and yet do 'em fast I recommend cheating..
By that I mean washes, now I cannot claim to be as good a painter as u_m, but I'm definitely in the intermediate category and my advice to you is the method I use to actually paint models (like u_m I have a tendancy to spend ages on a model, unlike u_m however, I never actually finish anything).

You base coat all of the colours you are going to paint, wash 'em (devlan mud is normally a good choice). and then highlight with the original base colour. It's quick, but they look really nice. (I normally use a white undercoat and heavily water down my paints, this means they act almost like washes and remove the need for excessive shading).

For necrotic skin try Deneb stone, wash with a mix of Ogryn Flesh and Leviathen Purple and then highlight with bleached bone. You can then glaze with whatever colour seems best to you. (If glazing is a bit over the top you can leave out this step quite hapilly).

Hope this helps, Monkey

EDIT: When I fully read u_m's post it seems he has already suggested the above, however in my experience if you just want a tabletop quality army a single highlight after the wash on every model in unit is normally pretty fast and effective.
 
What I'd like to add is that batch-painting is your friend, be it for tabletop quality or fully highlighted for the perfectionists among us. Get your paint mixes ready and note down the rough mixture as u_m suggested and then do the same step (for example basecoating cloth) on all models and then go on with highlighting the cloth step by step. Do the same thing to all models in your "queue" before you move on to the next step. It helps me as I'm more of a perfectionist finish units without spending a day on a whole model. Instead I try to push myself to finish the step I'm at for the whole squad. This might take 2 afternoons, but then I have 5-10 models painted instead of 2 ;).

As for the skintone: there is a nice tutorial by Redarmy in the Invocation #6 (our forums e-zine, can be found in the announcements iirc). It looks dead yet alive. If you're aiming for a more human looking skintone you can just mix grey and blue in your normal skin colours, just don't overdo it and experiment until you're happy with the results. Of course washes are your friend and so is blending once you get used to it.
 
One other thing you might consider is that along with keeping your recipe chart for the army is to premix some. Especially if you're planning on painting up a lot of them, either using an empty pot or grabbing some of the really nice & cheap ones that Walmart seems to have stocked in their crafts section.

On another major topic tied in, while citadel paints are decent, try out some of the other brands. I'd used Citadel paints a lot until I got a pack of Army Painter ones and liked those a whole lot better and the dropper bottles are so much easier to use anyway. I still use the citadel washes though.
 
Sorry for not replying, I couldn't get on tinternet....... What about highlights, because my highlights always stand out loads and are a lot "in your face" any tips on softening them?
 
Waterdown the middle tone a lot or the same as the highlight a lot depending on the color can be 1:10 or 1:20 and paint it over the area's you want to stand out less.
rinse and repeat if the first layer did not do it for you.
 
No that would just paint over it, from what I understand you are saying you want your highlight to blend in more with the base color. So what you do is delude your pigments so much that is only partly is covering, making it to mix in your highlight blend in with the back color.
Think about how a home printer can print every color with only 4 base inks, it is all small dots next to each other making different colors.
So what you are doing with high deluded paint is making small dots every where changing the color, very slightly. Drybrushing would be just printing over it instead of adding small dots.
 
But then how would I stop the paint becoming a wash like mixture and sliding off the place I want it?
 
You need a small detail brush and dip it off a bit on a tissue, you also might have to repeat the process a few times to get the result you want(let it dry every time). And yes it would be more ore less wash like.
If you do this on a few mini's the first one might be dry after you done with the last one so you can chain it.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu