Tips on assembling the Terrogheist\Zombie Dragon

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Dan_Lee

Grave Guard
Aug 14, 2010
262
Nottingham
Zombies
198
I've just finished assembling the terrorgheist (assuming it doesn't fall apart again).

Here are some things I noticed while building it.

The central body and tail are the same for both kits, and the head and neck are different for each kit. With a bit of work I think it would be possible to magnetize the necks so you could swap between heads.

The pose of the wings and legs are determined by which shoulder and thigh muscles you use, so you could model a terrorgheist in the zombie dragon pose, or vice versa. You could also possibly use the zombie dragon leg pose with the terrogheist wings if you were willing to sculpt your own rocks to support the limbs.

In step 12 you're supposed to put four tiny pieces on the terrorgheist's back, but I found the picture was terrible. I couldn't figure out how they stuck on so in the end I left them off.

Magnetizing the ghoul king looks like it will be tricky as he has very little contact with the terrorgheist's back. I'll let you guys know how that goes later.

The final stage of gluing the terrogheist to the rocks was very fiddly. In the end I found it was best to glue all four rocks at once and put it on the base as fast as possible. Doing one at once was a nightmare.
 
Additional tip on the build, step 10 has the neck to body assembly for the terrorgheist plus the meaty sections along the spine. Put the spine section on before the neck. Otherwise it's a tight fit that might need some trimming away to fit in.
 
I strongly suggest pinning the claws+ shoulder joints to the body.

And as a further tip get some plastic-card (offcuts from the movement trays do really well too) and glue the rocks to this to give the feet some anchorage as you are painting- as gluing the model straight to the base will make painting it a nightmare later!
(see pics below).


ai53.tinypic.com_2heyfso.webp



View attachment ai54.tinypic.com_2v1tczp.jpg
 
Can somebody tell me how big this thing is? It looks huge, just wondering height and width. Will it be a nightmare to transport?

Also, how easy would it be to use the ghoul model on a single base, as a lone vampire I mean. Looks pretty straight forward.
 
It's big ...VERY big. I was surprised at just how big the base was when I cracked the box. Definitely the biggest single model I've seen among my friends' armies. I don't have it in front of me but I seem to think it was 7 infantry wide, or right around there. The wings are very tall (i built the terrorgheist).

I would suggest a padded box for toting this thing around. I heard some ideas about making the wings magnetic, but the problem is that the thing is supported by them. I don't see any easy way to remove the wings from the body & claws without making this thing fall over.

I also had a rough time gluing it because of all the parts seem to rely on each other for positioning. Ended up gluing it to the base just so my rock-bases weren't all at different angles.

It is simply awesome though - definitely one of my favorite models.

-aki
 
SoulSeeker said:
Also, how easy would it be to use the ghoul model on a single base, as a lone vampire I mean. Looks pretty straight forward.

The ghoul has his legs spread to sit on top of the dragon and he's pretty much leaning horizontally, leaping forward. You could glue him to a base, but it would be like he was taking off for bow-legged flight.

-aki
 
You could always model a rock or something for him to be leaping of, I suppose? That's what I'm planning to do with mine, because I want a terrorgheist as a rare rather than a mount
 
Malochai said:
You could always model a rock or something for him to be leaping of, I suppose? That's what I'm planning to do with mine, because I want a terrorgheist as a rare rather than a mount

You mean like this:
ai54.tinypic.com_fzch2f.webp


:D
 
The base is 10cm by 15cm. The terrorgheist is 21cm tall, 17cm long and 17cm wide. The zombie dragon pose is different but I imagine the end dimensions are similar.

The wing tips look like they will be easily broken as they're long and thin and also stick out quite a bit.

I'm mounting my ghoul king on the terrorgheist by gluing pins to the king's feet and drilling holes in the terrogheist's back. The holes are easily hidden in between ribs, and I can also put holes in an infantry base to mount the king on. I've almost got it to work, but it is hard as the king leans forward so much.
 
Vengeance Crusader said:
Malochai said:
You could always model a rock or something for him to be leaping of, I suppose? That's what I'm planning to do with mine, because I want a terrorgheist as a rare rather than a mount

You mean like this:
ai54.tinypic.com_fzch2f.webp


:D

i also did this with my goulking model. I used a grave stone, cut the top off of it and place if on the edge of the base like it had fallen off, then my vamp leaping off of it
 
I have heard several people say the best way to paint it is on the sprue and then assemble it. Apparently it is a right mission to paint once it's all full done thanks the sheer ammount of bones and holey bits it has.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu