Xanrag's descent into darkness

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Xanrag

Zombie
Aug 7, 2012
30
Stockholm
Zombies
62
FINISHED PROJECTS

This first post will showcase my finished projects as they get done, with the following posts being a log of my progress.

So far I've only finished (and that is without extra blood effects and unbased) a unit of zombies so this post will be empty for a while until I get the first unit properly done which might take a while.

Until then, read on below!
 
This is my original post but now with inline pictures instead of attachments.



So I've been playing other games for a few years, mainly 15mm Flames of War and of course I've known about Warhammer for ages but this is my first foray into the game. I detested the old "no measuring" rule but since that has disappeared in the latest edition I have managed to be persuaded by some friends to join their gaming group. After looking over all the armies and checking out all the army power rankings it was pretty obvious Skaven was the FOTM, but rats.. meh. It wasn't hard to realize that huge units were the name of the game in this edition so I decided to get a swarm army. I read the different army books and found the Vampire Counts book to be pretty well balanced with almost everything usable in an army. The clincher for me choosing Vampire Counts was RebelWithACoz's excellent zombie tutorial that would let me churn out the 200 core zombies required with a minimum of effort. Thus I decided to go all in and buy a whole army in one go and try not to get water over my head.

I quickly discarded the GW zombies since the Mantic ones were not only cheaper but also better looking. I also got a unit I could use as ghouls at the same time since they were mostly part of the package.

After that I quibbled a bit about which units to buy for Grave Guard. The mantic ones frankly couldn't hold a candle to the GW ones so I cracked open my wallet and spent way too much cash to get a horde of the GW ones. I also couldn't resist getting a Corpse Cart and a Mortis Engine for the cool buffs and synergy.

After that I wanted characters, spirit hosts and misc but the GW lineup didn't look that good in my opinion, especially if you want multiples of something. I got recommended Reaper Miniatures and browsed for quite a while but finally selected a cornucopia of units from there to paint.

So, at the moment I have the following to paint for my army:

~200 Mantic Zombies
~40 Mantic Ghouls
40 Grave Guarda
10 Dire Wolves
Corpse Cart
Mortis Engine
2 Banshees
5 Cairn Wraiths
3 Spirit Hosts
3 Necromancers
6 Vampires

2012-08-28%252022.15.27.webp

Heavy Metal! This'll take a while to setup and paint...

This should let me get quite a few games in as a regular footslogger and having enough core to buy the cool stuff later and scale the points up.

I started with the zombies and used RebelWithACoz's tutorial as well as some pointers from him and did first 5, then 5 more and finally 40 more this weekend to finish the first unit.

2012-09-01%252021.21.02.webp

40 zombies just got their clothes painted and awaiting white spray and washes.

2012-09-02%252002.20.42.webp

50 finished zombies, still needing fresh blood and basing.

I also tested 5 ghouls using a different tutorial on youtube but I'm not satisfied with the results, I need to use lighter black washes and maybe more of them instead of one big one since it made the units kinda.. white-black instead of grey. Also turned all the clothing gray so I had to repaint those after washing, then wash again with Agrax Earthshade.

2012-09-01%252012.46.28.webp

5 kinda.. sucky.. ghouls.

I decided early on to have my units magnetized to make movement trays easier. I still haven't finished their design but hopefully I don't have to have a border around my movement trays.. we'll see. At the moment I don't think they can stand up to too many heavy metal characters but that's a later problem.

[video=youtube]http://www.youtube.com/watch?v=KebKepFofCI&hd=1[/video]
50 zombies on a magnetized movement tray.

Now that I have proven I can paint the zombies it is time to set my targets on the next unit.. not sure what it will be, but I'll start with doing the corpses on the corpse cart in the same manner as the zombies so they look similar. Then probably figure out the ghouls and get those done and then the grave guard, maybe squeezing in some unit fillers inbetween. (I also got the gravestones from Renedra everyone seem to be using.)

If anyone has any good guides how to paint the Grave Guard give me a link! :) I have found a guide or two for the Mortis Engine but I'll wait for that one last.. seems like it'll take quiiite a while to paint.

I'll keep you posted as my army progresses!
 
I decided to revamp this plog since I don't really like the attachment system here so decided to reinstall ye olde picasa that I haven't used in over a a year to link the pictures instead.

Anyway, since the first 50 zombies were mostly vanilla (i.e. hardly modified) I've now started working on the next 50 where all will be modified somehow. Since my Grave Guard will be modeled with Great Weapons I have quite a surplus of weapons from those sprues so I sat up all night last night modding weapons onto the mantic zombies as well as modifying some GW zombies bits I got from a friend. The GW zombies sure are larger and beefier but I think I've managed to pare them down a bit so it won't look quite as obviously weird.

2012-09-08%252012.24.41.webp

45-ish modified zombie arms for mounting as well as a custom banner made from a spear and some GG bits.

I also used all the torsos from the GW sprue since they seem to work best, I haven't tried using the feet yet since they are so very different from the Mantic ones. As you might've noticed above I also have a few command packs from Mantic and have put together the nonexistant zombie champions too to use as regular figures.

2012-09-08%252015.55.21.webp

Mantic/GW frankenstein zombies ready for priming.

Finally before putting together the next unit of 50 I've started working on some unit fillers. They didn't end up too bad I think and I finally managed to use the strange arm with the zombie head as I wanted with one grasping anothers head. The one trying to drag itself up and past an obelisk also used that arm albeit heavily pruned with a razor.

2012-09-08%252015.42.46.webp

Two unit fillers, there is also a rat (from the corpse cart) hiding behind the tombstone in the back one that can't be seen from this angle.

Now for a break before assembling the large unit filler (2x8 units) and then the individual zombies with weapons. I should hopefully be done before dawn tomorrow so I can paint them tomorrow.
 
Holy crud did I underestimate the time it would take to make custom zombies. I finally managed to get them all glued together and the seams filed down late last night. I also set up another unit filler so when everything is painted I'll have 118 "zombie units". That'll have to do for now, easily enough for a 1000-1500 point game and I have to get started on the rest of my army so I can start to play a bit faster. I'll finish the rest of the zombies later.

2012-09-08%252023.19.29.webp

Some more unit fillers. The weapons from the GW zombies were too large to fit on a single base so had to be made into unit fillers.

The goal now is to prime these tonight and then start airbrushing the Dark Flesh.. it'll take a while to paint them and I have to start planning how to do my Grave Guard.

Most of the Grave Guard will have great weapons but the odd one might be with Sword & Shield. If I make 5-7 models with Sword & Shield then I can proxy the whole unit as a Sword & Shield unit by having the first rank with it. Most of the time they will probably be Greatswords though since their Initiative isn't that high anyway.
 
Cthulhu said:
Very characterful unit fillers!

Thanks, both when interpreting it as being characterful and being full of characters. :) (5 zombies instead of 8 and 3 instead of 4 isn't that much "filler" really)

Vectra said:
so THATS how you are supposed to use that zombie hand holding a head! :D I gotta do that too.

I've tried various poses but always wanted to do this one. Had to cut off the hand and rotate it though to make the pose fit, but I'm hoping it will end up nice!

I've primed all the zombies black now and have basecoated about half with dark flesh. I did initially start out doing it with a brush as per RebelForACoz's video but I found that it took too long so I started airbrushing the base. Here the bases being magnetized really helps with getting into every nook and cranny of the zombies in a production line fashion with a lot at once. I made a little video of how I do it, included below.

[video=youtube]http://www.youtube.com/watch?v=siibY_Udzzg[/video]
 
Phew.. okay, I have to say that modding zombies with weapons and kitbashing Mantic and GW zombies takes about two or three eternities longer than just painting the Mantic ones as they are.

Anyway, now I've finally gotten the new ones to the same shape as the previous batch (no blood, no basing; but definitely playable) and can start to work on basing the unit fillers and assemble the Grave Guard. I have done the zombie parts of the corpse cart too so I could put that together too.

2012-09-19%252017.47.12.webp

All the zombies awaiting orders, some empties used to fill up the new unit that will be replaced with single unit fillers later (gravestones) and the unfinished larger unit fillers to the right.

2012-09-19%252017.47.49.webp

A closeup of the units awaiting basing on the unit fillers, not placed in the right places.

2012-09-19%252018.27.37.webp

A closer look at some of the modded figurines.

2012-09-19%252018.23.55.webp

A closer look at some banners and musicians. The banner to the left is custom from a GG banner and some troll hands.

I decided on a red banner but I'll never be able to freehand any graphics, so I'm looking at maybe printing something out that I can use as a template.

Now to finish assembling the corpse cart and start assembling the grave guard..
I finally managed to buy the Tamiya X-27 and have a ton of Silflor for the basing, but my aim is to get a playable force before I start dolling it up.
 
Thanks. Been busy with work lately so haven't painted much, but I've planned out how to do my grave guard and have started on one unit and have done about half of the corpse cart. As for my ethereals I'm leaning towards black/green instead of white/blue, but I'm not totally sold yet. The vampires and necromancers will just be a PITA to paint. :)

For my Grave Guard I'm going with rusted metal on armor/weapons, white on skeleton and red on cloth. Then wash all with agrax earthshade. Should hopefully have some pics up next week, I'm running out of time since I have my first game in two weeks!

I do believe I'll paint my GG in pieces and then glue together before the final wash though, it is hard to reach all the places when painting assembled figures.
 
Ugh.. I have finally scraped and checked all the parts for the Grave Guard. I do believe I'll paint them a bit in parts and then assemble since it seems easier to reach everywhere then.

I'll spray everything white tomorrow unless something else comes up.. but I think I'll finish a few to see the final effect before I start painting everything. I have five I've started on.

My final tally will be 1 champion (dual-wielding swords), 1 musician, 1 standard bearer, 10 sword'n'board skeletons, 5 dual-wielding axes and 22 using the .. whatchamacallits, swords on sticks.

The plan is to have the ten sword'n'board in the first rank(s) if I want to play them as such, otherwise not have them all or mix them in depending on the size of the horde. To really max the horde I can also use 10 gravestone unit fillers for a whooping 50 GG horde.

2012-10-19%252000.33.53.webp

40 torsoless infantrymen.. .. I tried using a bone primer on the test ones but it didn't end like I wanted so I'll use white for the rest.

2012-10-19%252000.34.08.webp

The torsos of the musician, the champion, a 2h wielder, a sword and board and a 2h axe. The champion will be the only one with that kind of helmet.
 
A full day of decisions and painting later I have a color scheme done and five prototype grave guard finished.

Without further ado, here are some blurry pictures.. (I really have to set up a photo spot with natural lighting and a tripod..)

As we left of in the previous post things had been primed but with a wrong color, so the white bones had been repainted. The saga continues..

2012-10-21%252013.53.02.webp

Everything metal is basecoated with tin blitz, since all metal is rusty due to the age of the armor.

2012-10-21%252014.30.17.webp

The metal is stippled with copper instead of burnt orange because I didn't have burnt orange but copper seems to work pretty well. Makes the rust a bit more rusty in places.

2012-10-21%252016.03.20.webp

The metal is drybrushed quite heavily with leadbelcher, making it look a bit more structurally sound but still rusted.

2012-10-21%252018.50.47.webp

With the metal finished it was time to paint the cloth, the belt and everything else. Lots of repair painting of white on the skeletons where the drybrushing and other painting made it metallic. Extra care was taken on the helmets to get a nice effect with the red color and the metal. This stage took forever, hopefully it will go faster when the figures are in smaller pieces.

2012-10-21%252019.15.45.webp

The figures are assembled and awaiting the final wash.

2012-10-21%252021.27.17.webp

The finished product after a heavy wash of a mix of 50% Agrax Earthshade and 50% water. The skeleton bits are nicely colored but the armor might have gotten a bit too homogenized, losing a bit of the rusty flavour. I'll have to check it tomorrow in daylight.

2012-10-21%252021.33.31.webp

The (blurry) backs of the figures.

2012-10-21%252021.27.59.webp

A try at a closeup of a figure or two.

So.. I guess my next task is to set up an assembly line for all the rest of the grave guard, as well as start to clean up all the ethereal units and decide on a color scheme for them. I'm leaning towards the black/green color scheme that seems popular, but we'll see.
 
Phew.. been a hectic weekend but I finished setting up, implementing and completing my production line for the grave guard. Here are some pictures from the production as well as the finished result.

2012-10-22%252020.46.44.webp

A gazillion pieces had to be basecoated.. I used silly putty here but I really shouldn't have, it was too sticky and the some got stuck to the pieces so I had to scrape them off with a razor.. ugh.

2012-10-26%252009.58.12.webp

Here are all the pieces with all the metal basecoated Tin Blitz.. just getting this far was a chore.

2012-10-28%252020.26.38.webp

But here we are, oodles of hours later, with everything with the correct colors.

2012-10-28%252020.26.45.webp

A closeup of some of the pieces.

2012-10-28%252023.48.16.webp

Before starting assembly I sorted everything out so as to get a minimum number of identical units. The different lower bodies are in rows and then the chestplates and pauldrons etc are divided up in columns.

2012-10-29%252020.24.04.webp

Assembly complete! This is the final unit after having received a wash of 50/50 Agrax/Water.

2012-10-29%252020.24.17.jpg

The finished unit from a more down to earth angle.

Left to do on these now is to base them, still waiting on that until I figure out a good basing standard. I did color all these earth brown though.

I've already started on my cairn wraiths, should be done tomorrow or the day after. I decided to go with a nice black cloak and since the modesl are mostly cloaks they shouldn't take long..
 
wow, that is a daunting amount of pieces to look at on a desk, and prepare! Kudos to you for getting them all assembled and painted!
 
Finished my Cairn Wraiths in record time. I did consider doing them in the same Ethereal makeup that I'm planning to do my spirit hosts in but browsing around and talking to my friends they seem to more be the grim reaper archetype so they basically just got a black cloak.

My Cairn Wraiths are based on Reaper models because GW only has one model available.. which is crazy if you want multiples of something and I don't want themt to look too dissimilar so I decided to go for the Reaper lineup.

My first task was to clean up the models (removing excess metal, cleaning with soap and a toothbrush etc) and then to start modifiying the models a bit. Mostly I didn't have to do much more than assemble them but one model I had to both remove the base from as well as replace the regular weapon with a greatweapon. Then I had to secure them to the bases which I did by first gluing them to the base and then drilling a small hole from the bottom and inserting some steel wire and gluing that. Hopefully that means the base will stay one if I drop them on the ground, but I wouldn't want to test it.

2012-10-29%252017.01.42.webp

Here are the models modded and mounted and ready for their basecoat. They actually rank up but I wouldn't want to get them charged from the side.

I basecoated them with the GW black spray, then I used three or four different shades of gray and did a quite wet "drybrush" with them to get some shading. I also did all the metal parts with the same rust recipe as all my other models (tin bitz, copper, leadbelcher) and finally I washed the model with undiliuted Nuln Black to even out all the shading.

2012-10-31%252001.20.59.webp

The finished product from ahead.

2012-10-31%252001.22.00.webp

And from behind.

2012-10-31%252001.21.46.webp

A closer look at the modded model, I have to straighten the hilt out a bit I see now. (for original model see: http://www.reapermini.com/OnlineStore/ghost/sku-down/03274)

Next goal: Clean up and mount all the other metal figures, then start with the spirit hosts I think. The characters will be.. ugh. First I have to buy a new can of white basecoat paint though, used it all up on the GG and Corpse Cart.
 
This isn't strictly speaking a painting post, but I christened my current forces in a joined battle with the Empire (1200pts each) against a Night Goblin army (2400pts, looots of fanatics). We won in the end and I learned a lot of valuable lessons.

Painting/Modelling lessons learned:
- Even if it looks cool and is easy to put in the front, you really really really have to make things not stick out so much if you ever want to be in close combat. I have to redo some of my characters since I can't really close the gap with anything and do close combat.
- Grave Guard snap in half real easily, the spine is really the weak point.. I foresee lots of gluing in my future.

And some general lessons:
- Vampire Counts are more dependent on a good magic phase than other armies, and don't be too afraid to use the dice to get spells off. I miscast twice but got lucky with the rolls, one 7 and one 6.
- Don't expect to get more than one spell off per magic phase, anything after that is just gravy.
- Dance Macabre is the spell to get. I got the AOE version of it off in the first turn which meant that close combat started in the second turn.. my zombies zoomed ahead first marching 8" and then dancing 8".
- Using Grave Guard with GW against Night Goblins is a bit of overkill. Sure I hit on 2+ and wound on 2+ but facing a horde of 60 infantry means they get.. quite a few attacks in before me since I have ASL. I'll go Sword 'n Board next time.

Anyway, here are some pictures of my army "in action":
2012-10-30%252019.55.11.webp

End of turn 1. Thanks to the Dance I got so far ahead that I really threw my opponents gamplan out the window. He moved his small band of archers forward so that his wizard with a magic missile attack could shoot on my Cairn Wraiths, but thankfully the spell fizzled. I lost a few GG due to shooting and fanatics.

2012-10-30%252021.49.02.webp

Turn 3 I believe. My Cairn Wraiths just kicked incredible ass killing a whole gnoblar detachment without a dent and ran into the side of the large horde of Night Goblin infantry. My GG charged them from the front and well, there my two units spent the rest of the game. The GG were pretty close to getting wiped out (ended the game with 5 models left) but thankfully I did get a Nehek or two off so they survived. You definitely have to run them in a large group to be useful, I only had enough for 24 in this game.

2012-10-30%252021.49.13.webp

The same shot from a different angle, showing my zombies during gaming lighting. Have to redo my front rank so I can rank up against the enemy without zombies diving backwards and crowdsurfing..

All in all a lot learned. One thing I have to buy now is lots of little tokens to keep track of things like curses, buffs and wounds.

.. I also have to get a tripod or something for my ipad/iphone, getting things in focus is a chore!

Most memorable moment is probably when I charged my unit of zombies over three fanatics and lost 27 zombies.. man, that hurt but they worked well as minesweepers. Next time I'll do it with Ethereal units instead though. :)
 
It wasn't an action-packed weekend this time but I did finish cutting and cleaning all my metal models and pinned them to bases as well as basecoated them white. Some of the figures will require a unit filler next to them because I can't see a figure fitting right next to them.. but they should look cool enough that my opponents won't be discouraged.

2012-11-04%252018.24.00.webp

4 Vampires and 2 Banshees ready to paint.

2012-11-04%252018.24.09.webp

2-3 Vampires and 2-3 Necromancers depending on how I decide to go with the guy to the far right.

In addition to the characters I also fixed up all the spirits for my spirit hosts and based them. Left to do is to put down some bushes, some rocks, some headstones and then flock them.

2012-11-04%252020.09.53.webp

6 Spirits first basecoated white then painted in varying shades of gray. I also gave them a quick agrax wash to even out the shaded areas a bit.

2012-11-04%252023.09.47.webp

When the grayscale had set I gave them a very heavy wash of green. Turned out pretty nice in my opinion.

2012-11-05%252023.58.36.webp

The first spirit host awaiting basing. I gave the black parts a quick drybrush with some gray to make it stand out more.

2012-11-05%252023.58.47.webp

The second spirit host, a bit blurred..

2012-11-05%252023.59.01.webp

And the third.

Now I'm wavering between finishing the corpse cart that I've started on or getting the Dire Wolves done. I guess I do need more core to get a playable force.. The characters will be a challenge, soooo many details.
 
No development these last two weeks on my Warhammer Army. I had to quickly paint up a small fleet for Dystopian Wars. I play the FSA and put together a list with some boats and some blimps. Took forever to paint, might just be me running out of steam though. And I couldn't resist buying a Varghulf when it was on 30% off, so I have one of those to paint now too.

2012-11-12%252023.50.43.webp

Choo choo!
 
Sooo.. long time no paint. Many reasons why, but primarily because I haven't had an opportunity to play for a while. I did get a game booked with a five day waiting period last week though so I panicked and started painting as fast as I could. I assembled, painted and finished 20 Dire Wolves (since I'm lacking core) and started but haven't finished a corpse cart and a Varghulf. I'll get back to those later, this post will detail the wolves.

Now I don't particularly like the GW Dire Wolf model but it is cheap enough and the units useful enough that I got some. In hindsight it would probably have been easier and better looking to get the Fenris wolves from 40k, but the cost would have been quite a bit higher.

2013-02-02%252015.13.38.webp

The first problem I ran into was magnetizing the bases. Since the bases were ribbed I had to break out my pliers and dremel and make a whole in the center of them to glue a magnet in.

2013-02-02%252016.46.32.webp

The second problem was that since the wolves came in two halves there was quite a bit of a gap when glued together, both in the skull and in the back. I googled up some images of animal skulls and found that there should not be a gap there so I had to do something.

2013-02-02%252016.50.56.webp

So I did. I filled the gaps in the skull and in the back with some green/blue-stuff to make it more consistent. I tried fixing the back of the skulls where they meet the body too ut it was too much work for too little effect. The top and the front of the skull is the most visible part so they had to be fixed.

2013-02-03%252014.02.02.webp

With regards to colors I wanted it to look nice but I didn't want to spend forever painting either. In the end I settled for Red Gore on the exposed flesh and Vermin Brown on the skin parts. And oh, I sprayed them white instead of black so that the skeleton parts would be "finished" directly and the fir could be colored with washes.

2013-02-04%252000.55.59.webp

After I finished a test subject and deemed it acceptable for playing I started painting all the wolves at the same time, color by color. That method seems to work best for me.

Once the primary colors were painted I finished the models by first washing all the muscles with a Baal Red wash, all the leather and skeleton with a watered down Agrax Earthshade wash and the fur with a mix of Nuln Black and a watered down Nuln Black wash.

One problem that plagues most armies that I've seen is that every unit is identical. I know there isn't much option with say a goblin army based on a starter box but I wanted to have so that no model in my army is identical to another model. With the wolves I solved this in that I first divided up the pieces so that no glued together wolf was identical but I also decided to modify half of them when mounting.

2013-02-11%252000.17.18.webp

Five of the wolves I modelled in mid-leap with the aid of some broken flying stands from 40k.

2013-02-11%252000.17.51.webp

Five of the wolves have two or more feet on the ground, these are modelled more in a walking or just-about-to-take-a-leap pose.

2013-02-11%252000.19.05.webp

And the remaning ten models are in the standard leaping position with the enarlaged base.

I still have to fix the basing on these, but that is common for all my models. My plan is to do them all at the same time later so they get a nice consistent look. I'm also waiting on the static grass so that I can give them the same color as my primary gaming table.

2013-02-11%252000.19.26.webp

A closeup of one of the walking wolves.

I'm not quite satisfied with the leathery skin, I might have to give it a drybrush of a lighter color or maybe a wash to make it a bit more fleshy.

Soo, quite a bit of work for just 160 points of core, but it had to be done. To round out my core I have ~50 ghouls and ~100 zombies left.
 
Another playtime set, another rush to paint stuff. This time I finished my 50 (well, 49) ghouls.

I'm not quite satisfied with how they look, but I guess they'll do. They probably won't see as much play as my zombies, but they sure are good for filling up core in larger matches. You really need a big clump though, as I found today when I was up against a mix of High Elves and wood Elves.

Anyway, before you can paint anything you have to clean it up, this ended up being a weekend of carving and sorting and gluing.

2013-02-17+13.19.13.jpg

Since I don't want duplicate identical units I sort by leg and body combo as well as trim some cloth from the bodies so they look different.


Once the main bodies are decided I still want to tweak the models, so about half I set aside and mount weapons on. The weapons are a mix of the ones that come with the mantic sprues and some leftovers from my grave guard sprues (quite a lot left there!).

2013-02-18+00.37.37.webp

Some get one weapon, some get two since the ghouls have two attacks. I also modify some of the gloves with knives so that I can use two of them on one model.

Once they are glued together they have to be basecoated. In this case I decied to go with white instead of black since I want the end result to be gray-ish.

2013-03-14+08.08.31.webp

All the models glued and basecoated.. just getting to here is quite a few hours of work.

The first thing I do is paint all the weapons with my now go-to rusted weapon formula: basecoat tin bitz, stipple copper, drybrush leadbelcher. I like how it looks given the minimum amount of work required.

After that comes the really boring part.. painting all the clothes. I use all the colors I have available in different combinations of shirts and pants and still it takes forever and is annoying work.. more than double the amount of clothes than the zombies have and much more precision required on the torsos.

2013-03-19+20.32.37.webp

Finally finished with the brushwork.. ages later.

Finally once all the base colors are done it is time for the washes. This time I am using a wash of 50% Nuln Oil 50% Lahmian Solution for the flesh and a mix of 50% Agrax and 50% Lahmian for the clothes and weapons etc. The final result is.. okay, but it is a bit more black and white rather than the grey I'd hoped for. I might have to go over these once more with an even weaker nuln oil wash.

2013-03-20+14.01.06.webp

Overhead shot of all the ghouls.


2013-03-20+14.01.34.webp

Closeup from the front. The Ghast needs a bit more work on the bloody bits.

Anyway, that's the last type of core I'm going to do. I'm skipping the skeletons, at least this edition, since they aren't that much better than zombies but harder to raise. The ghouls aren't that great either at 10 points each but against some enemies they are better than 3.3 zombies.

This week I also got a few shipments in of stuff that I'd ordered, among them a large GW shipment and a special surprise from france!

What might that be you ask? Why, it is ten boxes of Confrontation Daysatis Evolution minis.

2013-03-20+11.32.41.webp

All the boxes stacked up in a pyramid.

These are available at a great prize from ludikbazar.com, I got 20 models for €45; however the freight was a whooping €20 so all in all each model cost me €3.25. Compare that to the GW model for €8.66 + p&p per model even with 20% rebate from an online retailer and .. well.
My plan is to use these combined with the spare parts from 3 cartons of Crypt Horror/Vargheist boxes that I bought to make 20 Crypt Horrors.

2013-03-20+11.43.42.webp

The figures in their natural configuration.

The first thing I had to do was snip off the weapon, since crypt horrors aren't known for wielding two-handed halberds/spears. I then glued some to monster-size (40mm) bases to see how well they fit and the result was very encouraging.

2013-03-20+14.59.57.webp

Proof of concept unit, successfully used as crypt horror standins in tonights game.

What I have to do with these now is carve off some of the armor, cover up the techy parts and generally make them more horrible. I plan to make 9 Vargheists from the GW models and that should leave me plenty of bits to customize all the figures. Unfortunately I won't have enough heads for straight out headswaps of everything so some will have to retain their helmets. I do plan to use the hands etc from the kit here and there so I will have to repaint the things a bit.

Anyway, that will have to be a future post. Now I have to decide whether to finish up the final 100 zombies or go straight for the fun stuff and put together either two Mortis Engines or finish up my Varghulf and Corpse Cart I've started on but haven't finished..

In other news I have also started a Tau Army, and will be trying to paint that in a digital camo. That will be an interesting challenge, and the new Codex will undoubtebly steal my attention a fair bit. Painting all the Tau I've bought second hand will take at least a couple of years so there's no big rush there.. my main focus is still on Warhammer Fantasy and somewhat Flames of War.
 
At first I wasn't sure about all the bright colored clothing... but once you got the wash on there it evened it out quite a bit. I agree though, another light wash would do good for them.

Those confrontation miniatures, though.... Nice! Very nice! Awesome idea using them as crypt horrors. Love it.

I'm totally not directing your line of painting...but I love Varghulfs! :innocent:

Have you ever checked into our painting challenges? Maybe you should consider coming and playing with us. :perv:
 
I did buy a varghulf when I got a nice rebate on one, and I tried painting it but.. ugh.. I failed so bad I stripped the paint from it and I'm going to try again.

2013-02-07+22.39.50.jpg

I started with the brown fur and did some grey washing on the wings and some brown on the flesh.

2013-02-08+08.17.19.jpg

I then started to wash the flesh with Baal Red, to make it more fleshy and monster-y.

2013-02-10+22.55.40.jpg

However the color got away from me, turning too red. And the fur just turned into an unidentifiable blob, I had too dark brown as a base so the fur just blerghd when I washed it.

2013-02-10+22.55.24.jpg

The same image but with flash.. aaah.. get it away from me! *dunks it in a can of green soap* Phew!

I really need to find a good guide for how to do wings.. especially as I've glued together nine nice Vargheists now. I did three just as instructed and mixed the other six up a bit so I didn't get three sets of triplets.. I like all my figures to be unique.

2013-04-01+11.04.35.jpg

Nine Vargheists, none the identical twin of the other. Some are similar of course, but the variety isn't that high.

2013-04-01+11.04.55.jpg

A closer look at two of them. They all (except the three vanilla) required different amounts of greenstuff. Some needed quite a lot indeed!

2013-04-01+11.05.07.jpg

A closeup of a swooping one, with both wings backwards. Maybe not the best angle, the right wing looks a bit iffy from this angle.

I haven't mounted them yet as it seems much easier to paint them if unbased, but hopefully they'll look different enough to eachother as well as be able to be ranked up..

Honestly, the main point of putting these together wasn't so much to get the vargheists as it was to see what leftovers I would get so I could start modding the crypt horrors! I haven't gotten around to it yet though, too much work and now a Flames of War tournament coming up in two weeks time I have to finish a Late War army for. I'll get back with a single pic of that once it is done(ish).

And you won't believe how many hours I spent googling around for crypt horror alternatives before I finally took the plunge on the confrontation minis.. My miserly soul wouldn't let me buy the vargheists unless I could use the leftovers to build crypt horros. Just wasteful to get aaaalmost six minis per box instead of three when the only common pieces are the breasts and legs. Sigh.. GW.

Haven't checked the challenges much yet, my primary goal is still to get together an army I can play against my friends with without feeling too much shame. :)
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu