Bullhax's plog - Here be dead ogres!

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
RE: Bullhax's VC plog - Special guests may appear

Thanks a lot guys, always great to get compliments! :)

And if any of you have ideas regarding any of my 'work' please feel free to write them here maybe you have thought of something that would be cool or could be done better or different that I have not.

I will have my real life interfere a bit will try to push in a small update before the 8th where i have an exam.
 
RE: Bullhax's VC plog - Special guests may appear

A new little update in the Ogre Kingdom department, 4 models was all I had time for since the last time and it only came down to a couple of arm and weapon/hand swaps...

Also I've had my first experience with the horrors that is finecast...

I've heard/read a lot of horrible stuff about it but decided to give it the benefit of the doubt as I really wanted the Firebelly model and couldn't find it in metal close by.. That stuff is pure crap, blebs, holes, funky bends and more-annoying-than-plastic mould lines.. There was a horrible bend to the lower part of the hammer that I tried to smoothe out, I didn't use hot enough water though, my own damn fault so it snapped right off... I tried to make it into something positive and swapped the ends with the two handed hammer on my Crusher as the end left here was to small to make it believable.

It will be a while before I dive into buying a new FC model again if ever.!

I instead used the little spare time I had left in hollowing out a Chaos Warrior helm that will be featured on the Gutlords base to tie the two together.. It will be placed in the murky water to look like it flew off and got stuck in the muck when my Vampire Lord struck the unfortunate chaos warrior. Will include a picture of this when the whole model gets done as I wont pin them till both base and model is painted..

Here's some pictures of the models I've assembled:

Crusher:
Photo04-12-12214911.webp

Photo04-12-12214938.webp



Standard Bearer:
Photo04-12-12214800.webp

Photo04-12-12214830.webp



Bellower:
Photo04-12-12215045.webp


Stupid finecrap "!#!#%"#, but awesomely sculpted so i guess I'm happy overall Firebelly:
Photo04-12-12215013.webp



The bellower got his weapon from the Crypt Horror kit, the crusher got an irongut hammer and a ironfist from the Mournfang kit..
The standard bearer got an arm from the Mournfang kit, and a weapon swap from the offhand selection on the Ogre-sprue..!

When I have more time I will burn some flesh wounds on some of the models backs/arms and greenstuff the gaps from the swaps. Now exam friday and getting hammered afterwards!
 
RE: Bullhax's VC plog - Special guests may appear

I don't think i've come across this thread before, Everything looks quite spectacular so I'll have to keep an eye on it... Keep up the good work! :thumbsup:
 
RE: Bullhax's VC plog - Special guests may appear

Thanks Lynks! And That was my plan! Can't stop really I'm having too much fun with it! Although my real life does interfere with my ambitions regarding the amount of stuff I get done, but hey that probably how most of us feel :) Looking forward to next week where I will have a bit more time on my hands!!
 
RE: Bullhax's VC plog - Special guests may appear

Yet again it is time for another update! I've had the head from the Zombie Dragon kit lying around for ages and always wanted to use it for something, the horns for the kit I used on the Nurgle Giant I entered in this years Golden Bat (and that won 1st place in the general category) so I needed to replace those.. The Mournfang standard bearer will in all likelihood carry the Dragonmaw banner once or twice and the banner itself has some dragonscales sculpted onto it so I thought it would be a perfect fit.

I used the spare tusks from the Mournfang kit and cut them to fit. I cut off the roof of the mouth as the flat part on the ZD didn't look good at all at this angle. The sword arm was cut open and greenstuffed to fit, to make room for the horn and to give the model a more imposing feel. The banner arm was cut - mostly replaced with paperclip metal To make a skeletal arm. the hand was then filed down to remove the fingernails make them slimmer and cut where the joints would be (this is hard to see but should be noticeable once painted)

Im toying with the idea of getting the dragonscale "apron" from the Giant kit fitted onto the model somehow maybe as a cape? But that will have to wait for tomorrow. If you have any ideas please feel free to write!

Oh and here are some pictures of him:

Photo12-12-12224030.webp


Sideshot with the base:
Photo12-12-12224115.webp


Closer look:
Photo12-12-12224049.webp



I want to do more to the arm but my limited sculpting skills are making it hard, for now I will wait till this layer is dry and try and add more tomorrow to make the joint look more real.

My idea for the paint scheme was to paint the Ogre like the rest of the army but that the mournfangs ethereal this would make them stand out a lot on the battlefield and I can use them as unit fillers in a Black Knight bus or even as a Mortis Engine proxy.

As the painter in me is itching to come out and play soon I will start painting the Mournfang Standard bearer and the command group of the Iron Guts..

I will be away AGAIN this weekend so it will have to wait till next week.. This gives me time to add the last modeling touches to the models I've done so far before I prime them.
 
RE: Bullhax's VC plog - Special guests may appear

Awesome army man! I like the inclusion of so many different kits and ideas throughout your regiments, and there is lots of character to your work and custom basing which I really think is important.
 
RE: Bullhax's VC plog - Special guests may appear

Thanks a lot Ravenstein, some of the best armies I've seen have been the ones where people used diffirent models from different manufacturers, older models, models from different armies even 40k, all to give it a more personal feel.
The basing was the area I neglected the most in the beginning but looking at some of the work other people did made me realize that the base can be the one thing when done right that drags the model to a new level..

At least this is what I'm trying to emulate, and one of the many reasons I had to join this great forum, there are always people who does something better than you and inspire you to get even better and try out new things or doing them in a different way!
 
RE: Bullhax's VC plog - Special guests may appear

Speaking of bases, I like how you've marked the footprint prior to working on it, so obvious now that it's, well, obvious. I was going to wait a while before settling down into mine, with this tip I don't have to.
 
RE: Bullhax's VC plog - Special guests may appear

Hehe thanks, when I first did the base for the Dark Vlad model I thought about adding footprints to the bases in the back rows, I quickly decided that it would make little to no sense that large ogres walking througt wet swamp would produce no footprints.. i tried adding more the further back I got so it looks like more ogres have been trampeling through the terrain..! I will paint them up in the upcomming weeks so you can look how they pan out when fully done! :)
 
RE: Bullhax's VC plog - Special guests may appear

Bullhax said:
Hehe thanks, when I first did the base for the Dark Vlad model I thought about adding footprints to the bases in the back rows, I quickly decided that it would make little to no sense that large ogres walking througt wet swamp would produce no footprints.. i tried adding more the further back I got so it looks like more ogres have been trampeling through the terrain..! I will paint them up in the upcomming weeks so you can look how they pan out when fully done! :)

I love your attention to detail. I'd love to see this kind of army across the table from me.
 
RE: Bullhax's VC plog - Special guests may appear

Thanks, it's a bit of an obsession of mine that I have to work out stuff like that.. Even in fantasy I like that stuff have rules and boundaries to make the unbelivable more belivable..
My reasoning behind not including footprints from the Vampire Lord was that he would be swift, lightfooted and thus wouldn't make any.. It fits my armys fluff, of a stealthy assassin that is only seen when he allows you to. I haven't posted it on the forum yet, but here it is:


The Deathcheater Tribe
All having faced certain death some more than once, The Deathcheater tribe was nigh invincible and had grown too confident of their skill. Hearing of the mighty gathering of fierce adventurers and bountiful treasures in the city of Mordheim the Deathcheater tribe set out to claim it all for themselves. Fearing nought but the very largest of dragons, they set up a large camp in the unforgiving wetlands of Hel Fenn. This was a terrible terrible mistake, for a great terror lurked deep in the heart of the fen, great plans he had for the unknowing tribe.

Killing all that went near the camp he and his necromancer apprentice lulled the tribesmen into an arrogant sense of security. One fatal night they struck - swift as lightning the vampire silenced the Tyrant and his Slaughtermaster. Before the remainder of the tribe could even get a firm grip on their clubs; a throng of hands clawed and grasped at their feet dragging their heavy bodies into the murky waters of the fen.

Opening their eyes they woke as from heavy sleep they tried to bellowed with cruel laughter thinking they had cheated death once again. But something was wrong, not even a tiny whisper was to be heard - desperately trying again, but to no avail, the once so fearless tribe came to realize that they had been raised as lifeless puppets strung along obeying their new masters every whim.

They marched north.
 
RE: Bullhax's VC plog - Here be dead ogres: Now with ethereal mournfang

Hmm keep on forgetting how busy christmas can be.. I clearly just need to stop sleeping altogether or wish for more hours in a day, 24 doesn't seem to cut it for me..! Oh well.

On a plog note I tried out Ravensteins Ethereal guide (here) and loved it, it's more time consuming than just washing the model but it looks so much better, I went a little beyond that and mixed in some Hawk Turquoise with the watered down waywatchers and made it a similar opacity as the first mix and applied it to the fur parts to give it some more depth as the larger model made the single tone look off somehow.. I will try giving it a veeery thin coat of pure very watered down Hawk Turquoise to make it a bit more noticeable and to tie it in a bit better with the rest of my ethereals..

Oh and some pictures:

The leather rims will be painted with the effect Ravenstein used on his Cairn Wraith (found here)


2012-12-20231043_zps82834d9c.webp


2012-12-20231102_zps4e3c7769.webp


Overall I really like this effect and when combined with the undead ogre on top I think it will look really good! I bought a small resin statue that i want to incorporate into one of the other Mournfangs bases so it looks like the MF runs through it to enhance the ethereal effect and to liven up the bases as filling charriot bases can be somewhat tough :)


EDIT: Photobucket cropping works like crap, at first none was cropped now only one is cropped, and when I efter my profile both are cropped, wont forøget to crop them the next time :)
 
RE: Bullhax's plog - Here be dead ogres: Now with ethereal mournfang

Hi all, there has been kind of a drought painting wise with me being away for christmas having an examn on the 4th and afterward being sucked into Hitman: Absolution which has sucked up most of my spare time.. But I couldn't keep the brush down for the entire game so I had myself a painting session and finished up the base and the saddel on my Ethereal Mournfang..

I used more time than I care to admit toying with wetblending, staining, glazing primarily to get better at it..!

Sideshot of the whole model (middel part of the saddel is not painted because a certain ogres behind will fill it up!):

null.webp


And a shot of the saddel from the other side:

null-1.webp


Now all I can do is wait till the basecoat dries on the banner bearing ogre that sits ontop, the weather is horrid so I had to do some sweet-talking to be allowed to spray inside with open windows.. I will paint on him tomorrow evening and hopfully get him done by sunday evening.. But I have to decide on the colour-scheme for the entire army so it might be longer than that.!
 
RE: Bullhax's plog - Here be dead ogres! last update 11/01-2013

Killer! I love it. The ethereal 'nox is awesome, but that saddle is next level. It's almost a shame there's gunna be a big Ogre butt covering it up. I really dig this model so far. How many are you planning to do?
 
RE: Bullhax's plog - Here be dead ogres! last update 11/01-2013

Thanks man! Haha yeah, but just forces me to go all in on the ogre itself!

I have 4 mournfang in total and will make a unit with those trying to make the bases fit together.. I have a ME i haven't done yet and it will be done so it can fit in with the others as the center piece if I ever feel like fielding a unit 5 wide :)

The reason for making this my first model of the ogres to paint was that I wanted a test piece for both the mournfang and the ogre skin and with this model I got to do both. The other reason was that i would be able to field it as a ME when playing my VC's or even a filler piece in a unit of 10 hexwraiths (a setup I'm dying to try).

As for what I will do next it will probably be a BSB for febuarys painting challenge (Here). And then move on to either paint up some of my ironguts or finish the mournfang unit.
 
RE: Bullhax's plog - Here be dead ogres! last update 11/01-2013

Hmm, I have to stop making goal for myself I can't uphold... My Ogre is not even close to being done... As I feared I got stuck on the damn banner! I did it two times got it to a complete stage and wasn't quite happy with the result so I redid it a third time.. And now I think I'm on the right track! At first I treated it as a normal banner tried out some free-handing that didn't fall into my liking (mostly because I haven't decided wholly on what the tribe icon should be)

Then I decided to go with the Dragonhide Banner, use the fluff presented in the Ogre book.. So a piece of ice drake hide. Smelly rotting meat on the inside, smooth blue skin on the outside with some dragon scales still attached.

So here is my WIP shot of the banner:

Inside, with still wet Liquid green stuff:
null-3.webp


Outside (done, but as I realize now I forgot to paint the scales in the upper left corner, grrr):
null-2.webp


Then some shots of the skin and pants:
null-5.webp


null-4.webp



I would VERY much like to hear your oppinion on the skin tone and the pants that I was thinking should be army wide to give it a somewhat uniform feel..

The banners inside will when dry be painted up to express even further decay than the ogre itself.. I'm then toying around with the idea of adding the UHU glue tutorial (found (here), posted by Bigcannon) and drag strands of blood from the flesh to both skulls.. The skin that is still left on the Dragon head helmet will be painted in the same scheme as the outside of the banner to make the model come a bit more together as a whole..!

Hope to hear your thoughts on the project!
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

I am in love with that Ogre's skin color! I should also mention the whole missing flesh on the arm is awesomely done.
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

You have great levels of contrast. The skin tone is absolutely perfect. Think the yellow could be a little darker in the shady areas, but that said, great effort. Yellow is such a hard colour to pull off. I'm really like the banner idea too. I can't wait to see it finished!

Keep it up pal,

u_m
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

Thanks a lot! Glad you like it! I always tend to stare myself blind on these things!

@u_m yes yellow is hard to do (found out the hard way) but I wanted something to unify the army, I see what you mean, I will darken up some of the crevices! Thanks for the pointer I always look for ways to get better!

Next update should be tomorrow
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

Purple is a very good colour to use when shading yellow. Mixing a bit of liche purple and devlan mud (old paints, but essentially a dark purple and a brown wash) is a good start.

Overall it is looking very good, and I love your use of liquid greenstuff, clever.
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

Mad said:
Purple is a very good colour to use when shading yellow. Mixing a bit of liche purple and devlan mud (old paints, but essentially a dark purple and a brown wash) is a good start.

Overall it is looking very good, and I love your use of liquid greenstuff, clever.

Thanks for the advice I'm still learning and every bit helps to make myself a better painter :)

Will try this out on the next ogre I do! Glad you gave that in the old colours i have most of the "old" range, and I cringe on the thought of learning the names of all the new ones.. My Devlan Mud is one mini away form being done!

I've used the liquid greenstuff on the nurgle giant with great result it gives a lot of texture that is really hard to achive with normal greenstuff.
 
RE: Bullhax's plog - Here be dead ogres! last update 15/01-2013

Looks pretty freak'n cool. I like the idea of the rotted meat on the back side of the banner.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu