Need technical advice concerning NMM and OSL - added a little Guide with pics!

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Thank you for the kind comments so far, this little elf was a lot of work. Exam 1 out of 2 is done, so I'll be likely starting on the Knight soon.

@UM: usually I base my models before spraying them black, since you don't have to worry about ruining your paintjob like you do, when you glue the sand on afterwards. The basing of my woodelf army is not that spectacular - mostly just sand painted earthen and static grass on top. By the time I started it I was not aware of the cool sceneric forest bases some company sells... also I don't have the money to get every mini one of those. I think for this guy I'll use some parts of the citadel wood sprue, sand and static grass. I have these parts lying around, because I built a treeman out of the rest of the sprue ;).

I'm looking forward to more comments

Cheers,

Dogmar
 
RE: Need technical advice concerning NMM and OSL

Redarmy27 said:
Ahhh yes, NMM and OSL, few people like to go outside of their comfort zone on this one, but I beg to differ, I say "Come on over!"

The trick to NMM is to just look at metallic objects around you. Look at how different metals relect light and build off of them. Here's an example of a paladin I worked on:
ai174.photobucket.com_albums_w108_redarmy27_MalcolmFinalEntry.webp


In this picture you'll notice I work with two kinds of metal: steel and gold. However, all the reflections point in one area, all of them have a point of horizon. The trick is to determine your point of horizon and have that as the brightest point. It doesn't have to be white, but the point where light is at its strongest.

Use thin layers and glazes and be slow to build them up. The more time you take at this, the better it'll look!

Now for OSL, my absolute favorite, you're looking to emulate the effects of light. Again, use thing glazes. The best way would be to look for examples of such in movies (ie. Starwars with lightsabers). You want to study how light hits different objects and how that color tones what it is hitting. Objects closest to the source will look a lot like the source while objects farther will only have a light hint. Here's my OSL (you'll also see me do it a lot of my eyes in this way too):
ai174.photobucket.com_albums_w108_redarmy27_RJ_20Army_LicheKingFinal.webp


Overall, just try it and practice and don't be afraid to post it. Posting will get you some good feedback. Just go for it. Feel free to ask anymore questions. Once you get these two down, you'll be in love!

All the best,

Jake

Wow, this posts makes me want to quit painting forever due to the quality of the models and how poorly mine stack up against them.

Seriously nice minis!
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

If you dont mind Dogmar , i would like to "borrow" your thread to ask a question concerning OSL. Is there any way to paint using OSL technique but not use the common bright colours like green, blue, red yellow? Is it possible to do it using black (and white)? I would like to make my GG's weapons look like they have a deadly black aura surrounding them.Has anyone ever tried it?
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

I don't mind, desfer.
On your question: I have not tried to do weapons in OSL.just a few glowing eyes, and Jake is probably better in offering advice on that topic, but I can tell you a few things.
1. Generally it is possible to do "OSL" with any colour, it is important though that the colour of the light is different from the colour of the thing it touches. White would be possible if you give it a subcolour, imo. So your weapon which has to be the brightes object, would be white it a light shade of blue, green or whichever colour. That is because a pure white blade or a bright grey blade with white highlights would not look glowing, but just... bright. You could then work your your OSL by applying the subcolour to all areas the light touches and work up to thin glazes of pure white. Not sure if it works, but that's the only way I can imagine it.
On the black: I don't think it will look like a dark aura. As you use black shading in most deep areas, especially on armour plates, a black light effect would look a little out of place, as people would think it is some weird sort of shading.

Just my 2 cents, wait for Jake to save the day ;)

All the best,

Dogmar
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

this technique in my opinion is much easier to acheive with a air brush and tape. Looks alot crisper to.

Check out a youtube page called buypainted, he does this technique on grey knights and it looks immense.
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

WOW these past two pages are like a crazy movie montage... man struggles with NMM, mentors teach him NMM... man overcomes challenge to become victorious! beautiful work the elf's sword looks so crisp im probably going to use it as a sample to practice my own NMM this was so helpful
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Huh, didn't expect this thread to ever come to live again. I just had it in my "archives" for reference in case someone brought up the topic of NMM again. As it is now back I feel I can as well answer some of the new posts having improved my own NMM technique over the past 1,5 years by a big margin.

@Unanswered: Thank you very much for your kind words. Your comment made me laugh because of the comparison and makes me feel proud at the same time. It is always great to hear that the own work is so good that it's inspirational to others. If you have any questions during your trial process, feel free to ask them.

@Alark: It's true that you can achieve great things with an airbrush in much less time than with a brush. I doubt though that it is really that much easier on small things like sword blades of 28mm figures, they're really small and I bet hard to tape. You also need a lot of high quality and thus high price equipment to have something you can work with on that level of detail. Thank you for the comment, but as I don't have the money and the time to practice with an airbrush I'll stick to regular brushes as I think it still looks awesome and is soooo rewarding!

Cheers
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Dogmar said:
@Alark: It's true that you can achieve great things with an airbrush in much less time than with a brush. I doubt though that it is really that much easier on small things like sword blades of 28mm figures, they're really small and I bet hard to tape. You also need a lot of high quality and thus high price equipment to have something you can work with on that level of detail. Thank you for the comment, but as I don't have the money and the time to practice with an airbrush I'll stick to regular brushes as I think it still looks awesome and is soooo rewarding!

Cheers

While i do 100% agree that air brushing is much more expensive, once u have this kit your laughing. Its a worth while investmant. I can do 50 skelies to table standered in 1- 2 hours.

But back on topic, i just prefer using a air brush for this technique. It looks crisper and it looks to shine properly. Thats just my opinion though. And the tape can be annoying.
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Dogmar said:
What kind of tape do you use that you get sharp edges while not ripping off the paint you taped over by the way?

There are loads of different brands, i buy the cheapest.

But basically its special model tape, you can buy it in every model shop except GW. Its not like normal tape that will just rip off, but more like a spongey tape. You can get it from 4mm to 1cm last time i checked :)

Edit: Air brushing allowes for loads of stuff. It looks crisper rarther than leaving brush strokes. I still however use a brush most of the time for more control but depends what technique you want to try, different tools for different jobs.

For example alot of this mini could not of been done with a brush.
http://www.coolminiornot.com/forums/showthread.php?31535-Space-Marine-WIP-Part-2
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Amazing stuff indeed. I might try it out at some point should I get ahold of enough money to effort that kind of stuff. If you don't mind I'll continue via PM to not distract from the thread topic. It is meant to give people directions who are new to doing this the traditional way with a brush.
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

Dogmar said:
Amazing stuff indeed. I might try it out at some point should I get ahold of enough money to effort that kind of stuff. If you don't mind I'll continue via PM to not distract from the thread topic. It is meant to give people directions who are new to doing this the traditional way with a brush.

Glad you like it, im going to try the weathering technique out on my next batch of GG, ill PM results.
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

This thread is very helpfull, I've gotten many help here on the forum concerning NMM.
I'm still in the experimental phase, and haven't been able to paint lately, but threads like this are always helpfull.
I also like the examples in this thread with more precise help.

Cheers
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

To get this thread back on topic I've decided to upload a commented compiliation of the most characterful pieces I've done in NMM and the progress I've made in regard to improving the technique. I'll try to explain what was helpful, what worked and what didn't.

Here you go:
ai811.photobucket.com_albums_zz34_Dogmar001_Golden_20Bat_202011_DSC_0140.webp

ai811.photobucket.com_albums_zz34_Dogmar001_finished_test10.webp


The first picture shows my last GB entry and the second one my first attempt at NMM after putting most of the advice in this thread into practice.
You can clearly see my technique improved a lot compared to the first attempt. The reasons for this are as follows: The most evident changes were made to the gold formula. In my first attempt I started with scorched brown (no calthan brown available), worked upwards to snakebite leather and then added progressive amounts of bleached bone to the transition. As you can see on the hood this can work, but is not perfectly realistic as for example the sword's hilt does not look all that metallic. To get by this problem I tried to make the gold effect shinier. I altered the recipe as follows:

Basecoat with Scorched brown
Wet blend up to Snakebite leather in as many steps as you think is appropriate. Generally the bigger the surface the more steps I'd take.
Wet blend from Snakebite Leather to Bleached Bone (same rules as above apply)

Up to that point it's all the same except that my blending improved a lot with practice, but here is the really important part:

apply hard contrasts with thin but sharp lines of pure scorched brown and only blend to one side, you want one edge to keep the hard contrast, just as u_m said, NMM rewards bravery. Keep a metallic object near you for light reflex references.
apply a thorough glaze of Sunburst Yellow, be careful not to erase the colour transitions you created before though, just make sure the colour gives the surface a slight yellow touch.
apply a fine glaze of purple, yes, purple - a dark one preferably. It just adds a certain something to the mini.
Pick out the extreme highlights with a mix of Bleached Bone and Skull White or pure Skull White. If you feel it necessary you can of course reapply your darkes shade again as well, but don't overdo it or you will ruin the effect created through the glazes.

This is how I do gold at the moment, but I'm still experimenting and open for new thoughts.

The steel is a lot easier to do as you are just working with wet blends of black and white basically, however I've found that leaving areas completely black is not that good for larger surfaces, i.e. the axe blade. Imo you should keep the pure black and pure white areas as thin as possible as they resemble the extreme shades or reflexes in the metal, thus you should at least give most of the blade a coat of dark grey and work from there, you can then re-blacken the areas you want to have as extreme shades. This is what I am kind of unhappy about with the blade, starting with black and working up to white however works incredibly good on smaller surfaces (see the chains and the rest of the axe).

Lastly with a monochromatic (black & white) base you can add whichever colour you want to create magical steel or just give the metal that tiny hue of colour to make it look more lively with a simple glaze of said colour. Best example for this is the sword of my little Wood Elf soldier.

To come back to the "how to do larger steel surfaces sufficiently" again I'd like to give the example of my Green Knight
ai811.photobucket.com_albums_zz34_Dogmar001_P1000830.webp

ai811.photobucket.com_albums_zz34_Dogmar001_P1000825.webp


This is him with the first version of the blade, it has been redone since to look more like the one on my wood elf, except for a green glaze. What I'm getting at though is that you can clearly see the black areas that are there, yet not too big, especially most of the helmet is grey which comes closer to the normal "colour" of steel. If I had left more of it black it wouldn't have a metallic feel to it. Best advice here as I can't give you a perfect formula is have something near you for reference. Try to find a way between thorough colouring, working smooth and adding harsh contrasts.

Best results, as always, come with practice.

I have yet to try something that is called SENMM (sky-earth-non-metallic-metal), which is basically a highly reflective surface like chrome. It is incredibly hard to do and either looks completely awesome or silly. Should I ever try it I'll post up the results and a tutorial if there is a demand for it.

I hope this article will help all of you out there who struggle with NMM, I tried to sum up the most important things I currently know about it. Feedback is of course appreciated and encouraged. If need be I can repost this as a separate tutorial, I currently can't provide any step by step instructions which is why I left it at this.

All the best,

Dogmar
 
RE: Need technical advice concerning NMM and OSL - pics of finished testmini online - C&C welcome

After looking through this, i actually decided to give it a try on the new wight king model, i'm ALMOST done with it and i think it looks fantastic. i want to thank everyone who posted for all the great advice!

...NMM is a scary thing when you have no idea what you are doing lol
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu