Newer models, how exciting!

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!

Tawg

Vampire Count
True Blood
Jan 16, 2012
1,130
Zombies
1,334
I put my Crypt Horrors together today (Well mostly); First models I bothered to wash off the sprue, so I'm looking forward to noticing a difference with them. Otherwise I am either too poor at painting to notice, or the difference is so slim it isn't worth doing.

One thing I've noticed about a handful of newer models is that they often fit together in a way that I feel perhaps it would be a good idea to use green stuff (Perhaps liquid green stuff?) to close very minor cracks that can be seen. Else wise I'd probably have to go insane every time I notice them on my models :skull:

Anyone else have experience with smaller gaps on models like this? Just leave 'um? Fill with normal green stuff/liquid? Use something else entirely? I'm curious how other people tackle the issue.

It seems like it'll be a bit more of an issue for my Terrorghiest as well, since I know for a fact that the face will have a small seam once it's put together, and I am painting it as I assemble it; So I'm unsure about how to approach that situation..

On a related note, anyone have experiences involving painting over green stuff with no primer? I am pretty sure the most simple solution to my above stated issue is just going to be putting the head together on the already painted part of the neck/body and painting once it's on (And being very careful not to accidentally paint onto the already painted parts) and after I fill slight gaps. I assume it should be fine to paint on the green stuff without primer, after allowing it time to cure (Probably a good idea not to jump the gun on that part).

Maannn theses Crypt Horrors look amazing though! It's so painful knowing that 3 more cost nearly 50$ :skull: (Well a bit less, but still a ton!)
 
I always green stuff little gaps on metal, resin and plastic models if they are visible. I have not heard of liquid green stuff yet, but the normal stuff really is everything you need for gap filling. Of course I might skip one or the other gap on rank and file because of laziness, but on things like the TG I think it's mandatory as you spent a lot of money and time on buying and assembling it. Thus to do it justice you should make sure that it looks good once it's painted which can be achieved through the use of GS.

I have not tried to paint over it though without priming. I'd recommend to always spray-prime your models before applying paint as basecoating with a paintbrush takes longer and is less smooth & even. IIRC the spray primer is also a different formula than the thing in your regular paint pot.

Hope this helps,

Cheers.
 
Well I never used a primer to be honest :redface:
Didn´t had the time and money to buy me some, never tried spray painting too :slapface:
I know it takes me more time to do it with a brush, but it works out ok I guess, or am I just being ignorant now?
 
That has nothing to do with ignorance, just habit and personal preference. If it works for you continue to do so. I've always found the spray cans be worth the investions as it saves lots and lots of time. Imagine priming 2 raiders, 2 venoms, 1 ravager and about 30 infantry with your brush...
 
Dogmar said:
I always green stuff little gaps on metal, resin and plastic models if they are visible. I have not heard of liquid green stuff yet, but the normal stuff really is everything you need for gap filling.

Liquid green stuff is like a thick sludge that dries more or less like green stuff. It is very handy because it's much faster that normal green stuff for filling gaps. However there are some gaps (big ones) and other things whre only normal green stuff will do, basically you'll find it just makes basic gap filling quicker.

Liquid Green stuff.

On the main topic I have found that gaps do exist on the Vargheist of Crypt horror models. They aren't too big and are easy to fill. I also find that when two plastic parts are glued together there may be a line or mark left there, sort of like a messy mould line. I find that this can be removed just like a normal mould line. I just need to make sure the plastic glue is all dry or it can go ragged and messy on me.
 
Cuzzy said:
Well I never used a primer to be honest :redface:
Didn´t had the time and money to buy me some, never tried spray painting too :slapface:
I know it takes me more time to do it with a brush, but it works out ok I guess, or am I just being ignorant now?

I just use the cheap $ .99 flat black spray paint and it works great. No need to buy expensive spray just for primer.:thumbsup:
 
Dogmar said:
I always green stuff little gaps on metal, resin and plastic models if they are visible. I have not heard of liquid green stuff yet, but the normal stuff really is everything you need for gap filling. Of course I might skip one or the other gap on rank and file because of laziness, but on things like the TG I think it's mandatory as you spent a lot of money and time on buying and assembling it. Thus to do it justice you should make sure that it looks good once it's painted which can be achieved through the use of GS.

I have not tried to paint over it though without priming. I'd recommend to always spray-prime your models before applying paint as basecoating with a paintbrush takes longer and is less smooth & even. IIRC the spray primer is also a different formula than the thing in your regular paint pot.

Hope this helps,

Cheers.

Oh, I always prime my mini's; The question is in regards to the ZD I am painting as assembling it. Since I'm painting it in pieces to access the parts hidden by pieces in higher layers of the model, it makes it a fairly clear choice that I'm not going to way to spray paint onto it after I glue on a piece and have to GS the gap.

For instance I have the tongue/main body/tail length painted up; Once I glue the two head halves onto this however, there will be a clear gap to fill on the forehead/jaw I'll be wanting filled with GS, and that I will not want to Prime, since I don't want to cover any of the already painted part of the model.

I am almost certain that the Green stuff will not have any problems accepting paint without a primer but, I was just wondering what people thought about that issue, if there are any steps I should take I might not be thinking of or such.

For the Horrors, of course I'll prime them, since I have the chance to GS before I prime/paint any part of the model. (They don't really make too much hidden spaces).

I might run into some problems on my Mortis Engine as well, though I am not sure.. when I dry fit it it didn't seem bad, hopefully it'll fit together seamlessly enough to not need any GS work, or else that will definitely be a pain :skull:
 
@ Leech: I have never ever EVER seen that stuff at my local GW. It looks very interesting and I'll definitely pick some of that up. Just one question: Is there an alternative retailer for that as it is with normal green stuff (knead-a-tite)?

On topic: I see where you're coming from with the ZD. It sure makes sense to paint some parts of it before assembly and then of course you can't just spray the thing after GSing. Pant does stick to GS, I'd still recommend cleaning it again before painting though. I was talking more about using spray cans for unpainted, unprimed, assembled models, so the ones you usually get out of the sprue. There it saves a lot of time and I agree that flat black spray serves the same purpose while being a slightly different formula than GW primer.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu