RebelWithACoz Painted Zombies Technique!

  • The masquerade of murder returns! A new game of Vampires Amongst Us has begun. Unmask the killers, trust no one, and try to survive the night. Find out more and sign up now!
You're on target. When you spray the bone/white it can look like butt. It's a bit scary but keep going on washing the figure. I really doesn't pull together until the very end when you add the clothing and blood.

Here's the corpse cart zombies I'm working on. The were just sprayed white and are waiting for the final wash now:

photoedited.webp
 
The wash (use PLENTY OF WASH!) will cover more of the spattering effect that you don't want but here's a few tips to help out!

I used GW Skull white, and Army Painter Skeleton Bone and they were brand new cans. When the can is new the pressure is much higher coming out of the can, meaning the paint particles will reach the miniature sooner, and wetter. Meaning your not dusting your miniature with "dry" paint (i.e. the paint is drying on its way to the miniature) When using the new cans, do all of your zombies at the same time so you can maximise the pressure from the new can.

You're spot on about the temperature too. I'm from Scotland so it's not a problem for me being relatively cold all the time, but the humidity can also dry out the paint before it hits the miniature.

Also, the most important step. Ensure the place you buy your can from keeps their cans at room temperature. In my store i always take the cans from the shop floor and put them in the back room so they don't change temperature too often. Room temperature cans are ideal.

Also make sure you're shaking your can for up to 2 mins, most people shake for around 30 seconds and start spraying, ensure you're shaking the can for the appropriate amount of time. GW skull white, when sat for a while, can go a little gooey, shake that can!

P.S. Bellygrub that corpse cart is gonna look amazing, make sure you post a pic!
 
Teskal said:
Hi, did you had the same issue with your figure? Do you know how to prevent it?:


[/URL]

This actually looks fine, what you can do, is go a little closer but from a more strict direction. Take an angle from above and in front of him and give it another couple of blasts from around 12" away. Remember the bone colour will be changing to a fleshy colour once you give it plenty of wash, so don't be afraid to have more of a solid bone colour on your extreme highlights, this will make less of a spatter effect and most of that effect will be limited to shadowy areas of his skin, making for a pretty neat and deliberate looking texture :P
 
A small update of the final group of 60 zombies. I have 49 figures now in the spraying stage with 11 left to be based dark flesh.

Here they have been sprayed white and are awaiting a wash of Ogryn Flesh.

Img_1808.webp

Img_1809.webp


I'll post some finished pics to close out this thread shortly.
 
The final 60 zombies are complete for a total of 150 zombies. :O

The 4th unit

1st-1.webp

1stB-1.webp


The 5th unit

2nd-1.webp

2ndB-1.webp


A close up of a couple favorites:

He sees you...

Img_1858.webp

Img_1861.webp


A little blood loss from that exposed brain...

Img_1862.webp


And a final shot of both units..

Img_1870.webp


Hope you've enjoyed the thread. Your comments really kept me motivated to finish.

Now I must rest..
Img_1659.webp
 
If you're married to this formation on the field, have you thought about adding that water effect across some of the ranks in the two Zombie units to the left and right of your Cart, so it looks like the whole formation is crossing a stream, with the back two units and the Cart being mid-crossing?

To tie the whole formation together, I mean. I think that'd be very impressive looking.
 
thomasthefinch said:
How did you achieve the blood effect? I'm really looking forward to painting some zombies like this!

2 parts Tamiya Clear Red (This is the key ingredient)
1 part Leviathan Purple Wash (now called Druchii Violet)
1 part Badab Black Wash (now called Nuln Oil)


A quick tutorial ;)

I dunked my brush into the clear red, dabbed it onto my painting tile, redunked into the clear red, again dabbed onto the tile, dunked into the purple wash, dabbed the brush into the red, then dunked the brush into the black wash, and dabbed into the red/purple and mixed. Then applied to the model.

Also, do not seal/dulcote/matt varnish the figure with anything after you've applied this or you'll lose the shiny "fresh blood" look. Hope this helps.
 
Adam_Barrow said:
If you're married to this formation on the field, have you thought about adding that water effect across some of the ranks in the two Zombie units to the left and right of your Cart, so it looks like the whole formation is crossing a stream, with the back two units and the Cart being mid-crossing?

To tie the whole formation together, I mean. I think that'd be very impressive looking.

That sounds like a lot of work o.o but great idea! Everything is already based and I'm really tired of zombies at this point so I'm not going to go back and fiddle with them. Wish I had thought of this before I based them because that really is a great idea.
 
Wow what a great result.! I love your "corps cart" I will follow the guide for the marsh/swamp water when I do my next batch of zombies.. I will make an irregular horde as postet in one of the other great zombie threads and have a dying wish do to it as Adam suggests..! I have it made out in my mind and it looks freakin' awesome AND like a lot of work :)
 
hi,i know this is an old post but just watching the result of this technique pushed me to buy a mantic amry :vampire3:
i was just wondering if is it possible avoid the spray can and fix everything with the airbrush!
 
Blutsauger said:
It's like our zombie units are twins!

Did you used the same technique?
In that case can you tl me if is possible substitute the can with the airbrush?
I really wanna try the airbrush and my new mantic army would be the perfect test to check out the results!
 
Emicrania said:
Blutsauger said:
It's like our zombie units are twins!

Did you used the same technique?
In that case can you tl me if is possible substitute the can with the airbrush?
I really wanna try the airbrush and my new mantic army would be the perfect test to check out the results!

Yeah, I used pretty much exactly the same technique (I found the final result a little dark, so I gave them a very light dusting of white after the final application of flesh wash) and I used an airbrush. Worked perfectly. I think it worked better than it would have with a can, since I had more control over it.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

Quick Navigation

User Menu