RE: Painting ethereal green
I've been playing with using glazes to tint models painted monochromatic froom black up to white. I elected to try this technique out on a banshee. Here"s what I did:
I started by priming with Reaper black paint on primer. I prefer paint on primer because it gives a nice even coat without the risk of fuzzing.
Then, I used the large 1/4 stipple brush to drybrush in layers up to P3 Morrow White through varying degrees of Greatcloak Grey, Ironhull Grey, Bastion Grey, and Cryx Base Highlight. Note that I added a small amount of Goldens Flow Release and Goldens Retarder to the paints, which caused the layers to smear together at the edges.
If I was going for the monochromatic ghostly look, I would have stopped here, added a green glow effect to the eyes, finished the base, sealed, and called it done.
Instead, I selected three main colors to use to glaze the Banshee:
Ryn Flesh (skin)
Ordic Olive (dress)
Bloodtracker Brown (hair)
I mixed my glazes on my wet pallette. The Flow Release has some of the properties of a Retarder, but I figured the moisture would give me more working time. I went by feel on this one. The key is to get the glaze translucent. Given that I was going for a whispy look, I tried to get each glaze looking like this:
I started with the Ryn Flesh. The deepest layers should show little change, but the highlight layers should take on the tone of the Ryn Flesh with gradations created by the grey mid-tones. Brushstrokes should follow the musculature of the arms, face, and neck. If the Ryn Flesh pools opaque, your glaze is too thick. You can use a second brush to collect any extra paint.
After the Ryn Flesh, the Banshee looked like this:
Next, I used the Ordic Olive glaze on the dress. This is where the different grey tones used in the monochromatic highlighting should pay off. Long neat brushstrokes are important here. Small brushstrokes will appear in the white layer, and will make the cloth look funny.
Here's what the Banshee looked like after applying Ordic Olive:
Finally, I used the Bloodtracker Brown on the hair. Again long strokes look best on this surface, following the locks of hair.
After applying the Bloodtracker Brown, the Banshee looked like this:
I let the mini dry, and took these photos in the daylight:
After waiting for the glazes to dry, I looked the mini over.
I decided that the Ryn Flesh glaze provided the whispy etherial feel I wanted but didn't yield the glowing translucence I thought it would. It had more in common with Miranda on the rocks than damned tart looking for payback. So, I applied three additional glazes to the skin. In order, they were Sanguine Highlight, Ryn Flesh again, and Ryn Flesh glaze leftovers mixed in with a liberal amount of Morrow White. My intention was to create a sense of dimension and depth by building up a set of colors that would create a glowing yet unhealthy pallor without wiping out the monochromatic highlighting underneath.
Then, I finished up the remaining stuff (base, eyes, necklace, hole in chest).
Here are the pictures from the morning after:
Some things I've learned in the process:
1) Glazes should be applied very neatly. Any cross-bleed with be readily apparent.
2) With some practise, this could prove to be a great way to paint skin. I think translucent tints in layers can be used to add veins, stubble, tattoos, etc.
3) This mini looked more "etherial" before I started messing with the skin tone.